Jump to content
SAU Community

  

496 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Hi guys,

If you try a search on "BP Ultimate" or "Optimax" or even "Opticrap" (which appears in most threads on the subject!), you should get some good background. The thread below gives quite a bit of discussion on the topic with some quite informed views.

Here's the thread.

http://www.skylinesaustralia.com/forums/sh...50&page=1&pp=25

Cheers. :P

  • Replies 105
  • Created
  • Last Reply

Top Posters In This Topic

You do realise that all fuel comes from the one supplier and refinery - BP. They then process and refine it and sell it in two different barrels being - unleaded and premium unleaded. Once sold to all the other companies they then go about adding all there own additives and cleaning agents (probably why you notice differences in why some have higher sulfur content than others) But essentially they all still have the same octane rating as premium unleaded not the 98 RON which they try to advertise with. (I'm not sure but they may add octane boosters to there fuel maybe?)

The reason for the high prices of oil is one reason why fuel is becoming so expensive. Another is that there is no competition amongst other refineries and BP can raise the prices of there barrels of fuel to what ever they like to make as much profit as possible. Thats what I have been told anyway, it's like that over in Perth but may be different elsewhere.

:D

BP 98 RON or mobil is what i use... BP seems to be better.

There is a servo here that has 100RON racing fuel.  at $1.40 it isn't cheap... i put in 15L and it only lasted 80km.  hehe apparently a mixture of premium and avgas.

where is the servo sell 100ROM racing fuel? :D

BP is the only fuel i use

Hey, GotBoost, have a read of the thread I put up earlier ..... and bear in mind that most people reading this thread are not way out West, like us.

Having said that, there are a few things that you haven't quite got the right end of the stick on. You are right that in the West, the other fuel retailers have to buy their raw product from BP at Kwinana. As the other thread says, they then add their additives and sell it as their own. I am fairly sure that this happens vice versa in other locations around Australia where there is only one refinery within cooey. But there are a number of refineries in NSW / Vic, so there is competition nationally (so the price argument is a bit more complicated than you suggest).

The main point where you are not quite right is:

But essentially they all still have the same octane rating as premium unleaded not the 98 RON which they try to advertise with. (I'm not sure but they may add octane boosters to there fuel maybe?)

BP's 98 octane fuel, BP Ultimate is a refined fuel - i.e. it achieves its octane rating through refining, not through additives. It is not a 95 octane fuel with additives boosting it to 98. The Mobil 98 octane fuel is the same. On the other hand, Shell Optimax is a 95 octane fuel with additives boosting it to 98. I believe from what others have posted elsewhere that the Caltex 98 octane fuel also achieves its rating through additives.

Here in the West, BP produce the 98 octane fuel at Kwinana, but refuse to sell it on to anyone else. Shell do not market Optimax here, presumably because it is uneconomical to build the plant required to take the raw 95 octane fuel from BP Kwinana and mix it up to 98 octane. Mobil are also left in the lurch, with their lovely 98 octane fuel only available near their refinery over East.

As for which fuel is best, the conclusion from several other threads was that BP Ultimate or the Mobil 98 octane fuel were the best. Not surprising, given that their octane rating is not achieved by additives, unlike the rest.

Cheers. :(

Such fun.

Sorry but this survey is a waste of oxygen. As has been posted a number of times, in this thread and many others, oil companies have refinery sharing agreements. If they didn't then, for example, you wouldn't have BP service stations in Sydney. It is simply too expensive to truck fuel around the country and still compete with local refineries supplying their service stations.

To be of any use at all, you would need to have a a number of individual surveys that are state based. Even that is questionable as day to day supplies can vary in source.

:(

Something to think about;

We have 4 cars, that use around 65 litres of Optimax each per week. Last year they always seemd to run out of petrol on Thursdays. I don't know why, but petrol in Sydney is always more expensive on Thursdays. Maybe because Thursday is pay day for many people. Someone suggested to me that it's because people go shopping on Thursday nights and use their shoppers' discount to buy petrol. Eventually (being a scrooge) I got a a bit peeeed of with paying up to 12 cents litre more, just because of timing.

So one Tuesday (the cheapest day) I filled up one of the drums we use for the race cars and stuck it in the garage. I told the drivers to only fill up on Tuesdays and to fill up out of the drum if they ran out on other days. Plus we always use shopper dockets to get the 4 cents per litre off at the local Shell.

The result, so far this year we have saved over $1K on petrol, compared to if we had bought it on Thursdays and not used the shopper dockets. So every year I can buy a new turbo for one car, and that will make it go faster than using any other brand of petrol.

:cheers:

PS; we have been know to fill up 3 cars and the drum on one shopper docket, just don't reset the bowser between cars.

PS; we have been know to fill up 3 cars and the drum on one shopper docket, just don't reset the bowser between cars.

I have tried that many times with the work trucks filling 2 or 3 at once with each truck having 3 tanks each with approx 180L capacity so the bowser ends up pumping out about 1200-1500L with a potential $50-$60 rebate. ( the drivers toss a coin for the flybuys, lol)

But in VIC anyway, the dockets are limited to 150 litres from memory and most attendants wont let it happen. On average, we get away with it evry 3rd or 4th time.

  • 2 weeks later...

OK, so after seeing the poll, and understanding that more than a few people here know what they're on about, I decided to try BP98, again. Well, that's the 3rd and final time for me.!! I'll stick the the smelly Expensomax, and my car will continue to run well. I just don't see anything 'great' with BP98, car goes/idles like crap until it gets rid of the tank. i guess it must be an 'age' or 'tune' thing in each car?. Ayways, each to their own I guess!

OK, so after seeing the poll, and understanding that more than a few people here know what they're on about, I decided to try BP98, again. Well, that's the 3rd and final time for me.!! I'll stick the the smelly Expensomax, and my car will continue to run well. I just don't see anything 'great' with BP98, car goes/idles like crap until it gets rid of the tank. i guess it must be an 'age' or 'tune' thing in each car?. Ayways, each to their own I guess!

I noticed that you live in Melbourne, there is no BP refinery in Victoria.:rofl:

My car simply runs better on optimax than ultimate. I've tried it several times thanks to posts like this and it just runs better on optimax. On ultimate it stalls more from the revs dropping and bouncing while idling etc.

I accept that Ultimate may be better in some places/some cars but so is optimax, definitely.

running in my vc commodore w/ worked 253, high torque cam, 4 barrel rochie with oversized jets and high flow air filter, i did 2 dyno tests, 1 with optimax and the other with bp ultimate, both using top end lubrication oil in the tank, which provides no fuel character stats. my car pulled 79 horses on optimax, 112 on ultimate 98, i think that speaks for itself!!!! i also found that i get about 45 k's per tank more with ultimate versus normal unleaded

running in my vc commodore w/ worked 253, high torque cam, 4 barrel rochie with oversized jets and high flow air filter, i did 2 dyno tests, 1 with optimax and the other with bp ultimate, both using top end lubrication oil in the tank, which provides no fuel character stats. my car pulled 79 horses on optimax, 112 on ultimate 98, i think that speaks for itself!!!! i also found that i get about 45 k's per tank more with ultimate versus normal unleaded

You live in Perth, that's where the best BP refinery is in Australia, using one of the best oil feed supplies in the world, NW shelf crude. Having been to Perth many times I have yet to see Shell Optimax on sale, have I simply missed it?

:cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...