Jump to content
SAU Community

Recommended Posts

So after what the mechanic did it made a world of difference and worked much better. But still sorta got the same issue which is that it stalls when going uphill. also the car idles bad the tachometer moves very slightly up and down here are videos from after what i did to try fix it and seems to be a bit better. The idle also sounds better with the aircon on. Here is what I've done so far to try fix it:

 

* New spark plugs from 2 months ago

* Changed oil 2 times (first one for testing and it went black quite fast but now got brand new Penrite 10w-50 I think it is + filter)

* Cleaned IACV Valve was quite dirty but don't know how much it is (gasket is broken but used some gasket filler no leaks, might replace gasket later)

* Cleaned throttle body was filthy as well but didn't originally fix problem

*  New radiator coolant

* Cleaned pcv valve was dirty to but did rattle before cleaning and don't think it made much difference

* Unplugged air flow sensor while car is on and it turned off so that indicates to me the sensor is good

Don't know what it could be, don't think it's the coil packs, haven't checked oxygen sensor. What do you guys reckon it is? Maybe pressure plate? Don't think it's the head gasket. I wanna try work on some stuff until he arrives see if I can fix the problem in the mean time.

 

This first one is with air con on the idle sounds better and second one is with aircon off and idle sounds worse

You need to pressurise the intake to find a boost leak.

You haven't posted about what mods your car has, so we assume it's standard.

BOV:http://jp-carparts.com/nissan/part_detail.php?maker=nissan&type=89&cartype=7&fig=144&part=1448369F02&page=2&img=144B 002

14 minutes ago, silviaz said:

I dont think this car has a blow off valve? 

Don't make the mistake of thinking that all BOVs are externally venting wank noise makers. The Nissan turbos had recirculating BOVs, although it is technically more correct to call them a compressor bypass valve.

5 hours ago, GTSBoy said:

Don't make the mistake of thinking that all BOVs are externally venting wank noise makers. The Nissan turbos had recirculating BOVs, although it is technically more correct to call them a compressor bypass valve.

Ah ok looks like i need to take apart the turbo according to that diagram?

35 minutes ago, silviaz said:

Ah ok looks like i need to take apart the turbo according to that diagram?

Not sure why you would say that. To pressure test the inlet tract you should probably google up a guide - it has been discussed here bazzillions of times. You basically just need to access the inlet of the turbo (and some bits and pieces).

The diagram you were shown, shows all the pipe and shit that could participate in a vacuum/boost leak. I've circled the BOV for you

image.png.aafbfdec9c55a8e69528b6560702ec96.png

cheers

  • Thanks 1
50 minutes ago, GTSBoy said:

Not sure why you would say that. To pressure test the inlet tract you should probably google up a guide - it has been discussed here bazzillions of times. You basically just need to access the inlet of the turbo (and some bits and pieces).

The diagram you were shown, shows all the pipe and shit that could participate in a vacuum/boost leak. I've circled the BOV for you

image.png.aafbfdec9c55a8e69528b6560702ec96.png

cheers

My bad it looked like i needed to looking at the diagram lol

On 1/15/2020 at 5:26 PM, GTSBoy said:

Not sure why you would say that. To pressure test the inlet tract you should probably google up a guide - it has been discussed here bazzillions of times. You basically just need to access the inlet of the turbo (and some bits and pieces).

The diagram you were shown, shows all the pipe and shit that could participate in a vacuum/boost leak. I've circled the BOV for you

image.png.aafbfdec9c55a8e69528b6560702ec96.png

cheers

Fixed it. Timing was out by one tooth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...