Jump to content
SAU Community

Recommended Posts

Hey, I have a 94 r33 gtst manual skyline. My brother has just bought a VN ss. ive raced him and kicked his ass, but only when we were rolling at 20kmph. his is an auto its got the usuall mods like exhaust and extractors. So how do i take off so that i kick his ass, i know that if i get a good start, all he will see is my nice big round tail lights, but if i stuff up than ill have to chase him down, which i know isnt a problem i just wanna smoke him at the lights, cos hes a commonhore lover and skyline hater. Can anyone help? do i just drop the clutch at say 2200 rpm, or is there some other way. Please help?

Link to comment
https://www.sau.com.au/forums/topic/47956-how-to-take-off/
Share on other sites

Practice, and some more practice. Launching a manual is more involved than an auto and probably less consistant until you have it down pat.

I would be dropping the clutch at more than 2200. Depends on clutch, tyres, surface etc.

Get down to a track and line him up and you'll see who passes the line first.

Adam

Link to comment
https://www.sau.com.au/forums/topic/47956-how-to-take-off/#findComment-966739
Share on other sites

don't both racing commonhore's they are worth the petrol and wear on the car, having said that if you car dead keen to smoke him dropping it from about 4,500rpm should get it right in the rev range off the line.

I'm not to sure if you'd be able to beat him off the line entirely the VN's are 3.8L V6's and have a fair bit down low espescially considering it's auto it'll take off pretty fast.

Link to comment
https://www.sau.com.au/forums/topic/47956-how-to-take-off/#findComment-966755
Share on other sites

IMO dropping the clutch is the worst thing you can do for a good launch.

I used to slip and ride my clutch off the line from about 3200rpm-ish... it got me moving smoothly and at the same time was building boost. HOWEVER its a real bitch on your clutch and will wear it out if you are constantly doing that.

Dropping the clutch in a RWD car will either bog down or wheel spin

my experience and opinion only.

Link to comment
https://www.sau.com.au/forums/topic/47956-how-to-take-off/#findComment-966768
Share on other sites

Its a VN ss so its a V8, And ive done a little bit of practise and found that if i drop the clutch any higher than say 3,000rpm it just frys the tyres big time, its only got a cat back exhaust a pod filter and a 2800ft pound pressure plate and standard clutch. So i think 4500rpm will just be way too much wheel spin, somtimes even when i drop it at like 2800 rpm it has heaps of wheel spin. so what do i try, i really wanna smoke his VN V8 off the line, and show him that skylines are shit. any help would be much appreciated

Link to comment
https://www.sau.com.au/forums/topic/47956-how-to-take-off/#findComment-966778
Share on other sites

4,500rpm should get it right in the rev range off the line.

yea seems a little high i havent really been pracing but my gts-t is bone stock and i found slipping it alittle from around the 3k mark still lit the back tires up for a second or two then traction was back and i was on my way :cheers: (ps take it to the track much safer ;))

Link to comment
https://www.sau.com.au/forums/topic/47956-how-to-take-off/#findComment-966798
Share on other sites

I personally reckon it's not worth racing your beautiful piece of art and craftsmanship, they are good cars, if you take car of them it will be much better off in the long run. The skyline engines like to rev so rev them don't drop the clutch on em.

Personally I reckon automatics will be able to bet a manuals off the line.

I used to own an R31 Skyline, it was auto, i'd put my foot on the break and rev it to 3,000rpm then let go and it would take everything off including new monaros and skylines the line but never could beat all wheel drive cars, just had to much traction off the line.

Link to comment
https://www.sau.com.au/forums/topic/47956-how-to-take-off/#findComment-966823
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 馃槵 I'll let you know how I get on if I still have use of my hands afterwards 馃槄
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 馃ぃ, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
  • Create New...