Jump to content
SAU Community

Recommended Posts

SAU NSW Charity Kebab/Pizza Cruise

 

Happy New Year, Guys & Gals!

It's a new year, and a new decade, and we're keen to get the fun started! When thinking about what to do, we thought it to be a great idea to kick off the year with a kebab/pizza run!

This particular event will also be particularly special as we'll be running this cruise as a fundraising event to help those affected by the fires raging across the country! All donations from the day will be passed on to the NSW Rural Fire Service to help those who are giving their all to protect the rest of us!

Date: Sunday 2nd February

Meet Location: Loftus Oval Car Park, Loftus

Meet Time: Meet at 9:30am for a 10:00am departure

Destination: $iki $iki Baba Kebab House

Map: https://www.google.com/maps/dir/Loftus+Oval+Car+Park,+Loftus+NSW/siki+siki+baba/@-34.2605219,150.9500738,11.29z/data=!4m24!4m23!1m15!1m1!1s0x6b12c73fe6b7c2f3:0xfdae04950539a2c9!2m2!1d151.0511936!2d-34.0510478!3m4!1m2!1d151.0567577!2d-34.0690647!3s0x6b12c6cf305c716f:0xfc8256d9ae0af09d!3m4!1m2!1d151.0161184!2d-34.1610368!3s0x6b12c336381197ad:0x85fed39a8061329d!1m5!1m1!1s0x6b1310a668e21f51:0x6ebbc04d71e80fa!2m2!1d150.8474969!2d-34.452282!3e0

We will meet at the Loftus Oval Car Park in Loftus and then head off straight into the Royal National Park, heading towards Stanwell Tops.

When we reach Stanwell Tops, we are planning to stop over at the lookout for a short break before we continue to our final destination.

Here we can make a quick rest stop to stretch our legs and allow everyone to catch up before making tracks again.

From Stanwell Tops, we will head to the Princes Highway, heading down to Unanderra, where we will be turning off at Five Islands Road. After this Unanderra Exit, its only two short turns until we reach $iki $iki Baba Kebab House!

A few notes about our destination for those that haven't been there before:

- There is a small carpark at the destination. Limited spaces are available, but, there will be street parking available both beside and across from the kebab house

- Parking across the street is in a residential area, so we would like to remind those of you who park there to be on your best behaviour when driving through those streets.

There will be a lead and follow car so no one should get lost.

We will also be bringing along walkie talkies to keep the group together so if you have one please bring it along.

Make sure you have a full tank of fuel at the initial meeting point as there will be no time to refuel on the way.

If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior!


This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days.


This is an official SAU:NSW event and will be run under a CAMS permit.

One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general.

When attending one of Skylines Australia NSW events please try to:

• Be aware of surrounding environment and act accordingly.
• Drive courteously on the state’s roads as a true enthusiast should.
• Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly.
• Any misbehaviour will not be tolerated and you will be asked to leave.


Thanks guys and hope to see you there!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is that the blue one rpm?  
    • Update 2: Today I'm f**king pissed. Some of you probably saw my thread that I opened shortly after joining this forum, "urgently need expert/experienced opinion", in which I discussed the possibility of a porous RB26 engine block which I also found hard to believe. Currently both turbos are out since the shitty braided line that was installed by whoever fitted the GT28 turbos leaked oil onto the exhaust. Today while working on the cam covers to put new gaskets and half moons in, I cleaned the side of the engine block with brake cleaner. Some time later I saw that it was still glistening with oil or coolant so I dried that off. But it was wet again shortly after. Verdict: I'm royally screwed. What you can see here (hopefully, despite shit resolution), circled in red, is a crack above the turbo oil feed. Extent is a few cm long and basically goes from #3 cylinder wall to #4 cylinder wall. It slowly lets coolant through, even without any pressure behind it. I am absolutely dumbfounded as to how this crack even formed, especially since it isn't along the cylinder as it usually is but rather a horizontal crack. Probably a few cm in length. Not sure on how to deal with this issue right now. Most likely, the only true fix is a new engine block, and even a relatively well done temporary fix requires at least a full engine teardown. Neither of those really fit my timetable right now, the car has been in my buddy's garage long enough as it is. I'm open to suggestions, but I'll be looking into ordering a new 05U block soon so I have one ready for the coming year, or whenever the current block inevitably fails fully. (Most likely once the crack reaches one of the frost plugs) I think it'd be a waste of money and time to rebuild the engine with this block. Oh and I found a rust hole on the side pocket of the trunk, which someone covered up with sealant goop, a piece of number plate and bodywork filler. Fun times. So far for every issue we fix we just find a new one that is arguably worse.
    • I have not found this no. I put one back on a couple days ago with no drama. I agree they are tight, but no need to remove anything. 
    • That is gates blue racing belt
    • Anyone found gates blue racing to be extremely tight/ almost impossible to install without moving the exhaust gear
×
×
  • Create New...