Jump to content
SAU Community

Recommended Posts

Parts List

 

OEM Nissan Parts:

 

R33 Gtr Rb26dett Engine

R33 Gtr 5 Speed Transmission

R34 Gtr Front Subframe

R34 Gtr Front Lower Control Arms

R34 Gtr Front Upper Control Arms

R34 Gtr Front Knuckles

R34 Gtr Steering Rack and Pinion

R34 Gtr Front Sway Bar

R34 Gtr Front Coilovers (Ohlins)

R34 Gtr Front Axles

R34 Gtr Front Brakes

R34 Gtr Front Brake Lines

R33 Gtr Front Prop Shaft

R33 Gtr Main Prop Shaft

R34 Gtr Rear Subframe

R34 Gtr Rear Diff

R34 Gtr Rear Axles

R34 Gtr Rear Control Arms

R34 Gtr Rear Hubs

R34 Gtr Rear Brakes

R34 Gtr Rear Brake Lines

R34 Gtr Rear Sway Bar

R33 Gtr Attesa Pump

R33 Gtr Attesa Fluid Reservoir

R33 Gtr Transmission Crossmember

 

 

Aftermarket Parts

 

Engine:

HKS 2.8L Rotating Kit

HKS Valve Springs

Tomei Pro Cams

HKS Timing Belt

HKS Cam Gears

N1 Oil Pump

N1 Water Pump

HKS Gaskets

G-Force Silicone Coolant Hoses

Reworked R34 N1 Turbos

Tomei Turbo Dump Pipes

Apexi Downpipe

Nismo Flywheel

Nismo Clutch

 

Fuel System:

AEM In-tank Fuel Pump

Aeromotive Fuel Pressure Regulator

8 AN Fuel Lines

Aluminum Fuel Rail

GM Flex Fuel Sensor

 

Chassis:

Nismo Engine Mounts

Nismo Transmission Mount

HKS Exhaust

Chase Bays AN Power Steering Hose

R34 Gtr Aluminum Radiator

 

Electronics:

Adaptronic eMod004 ECU

Full Race ETS-Pro Diff Controller

Wiring Specialties RB26 Universal Pro Engine Harness

Greddy Boost Control Solenoid

Depo Wideband 02 Gauge

R33 Gtr Drop Resister

R33 Gtr Ignighter

 

Misc:

HKS M35 Spark Plugs

HKS Oil Filter

Royal Purple Engine Oil

Royal Purple Gear Oil

Royal Purple ATF

3D Printed MAF Delete Pipes

Sprinkle of Magic

 

 

 

 

 

  • 4 months later...
  • 5 months later...

I'm curious to know whether the OP had to modify the chassis legs to clear the front axles. It would be a show stopper in NZ. See the raised section on the BNR34 chassis:

tempsnip.png

Edited by NZ-GTT

 I found that the GTR subframe sits approximately 2 inches lower in the car than the GTT sub frame.   So what I did was box the end of the sub frame mounts adding that additional 2 inches and contouring it to the frame of the GTT.   Then I drilled 1 inch holes through the existing frame rails vertically and sleeved them with a .060 wall tube.   I attached the sub frame to the existing frame rails using 1/2 inch grade 8 hardware.   Keep in mind that you also need to modify the driver side floor pan as well as the driver side frame rail to except the GTR transmission mount.   

C003EE28-3D5B-4A4C-8E22-C43BECEF2B24.jpeg

B6E4093D-EA5B-48ED-8A41-4A47C16A7788.jpeg

420BFFF6-6CD6-4258-B345-87475C14A8D5.jpeg

089828ED-F4CE-4066-97CB-7C2D5D07C532.jpeg

15FA9475-3301-4020-9637-9D8E9F6C5595.jpeg

ECCE8B9D-E209-49CA-9C22-FB531D2D8345.jpeg

8F71C6AF-9942-4297-A24D-2F4E77846DBD.jpeg

9B20962A-B9F0-47CC-99C2-BE0ADB207C50.jpeg

B12AAD06-0A81-44F1-AF1C-E86B1177CE2A.jpeg

80B366A1-CC4D-4C9A-9307-8131B3AE067D.jpeg

5905F6B1-1713-4396-A647-B49B0D05C7EE.jpeg

94EB83E6-B13C-4413-96E7-92904C7556B9.jpeg

B18C9BE4-F386-4E0B-BF2C-AF1A56CC0BEF.jpeg

54557C5C-1647-4B1C-A8D5-15C81F45BC6F.jpeg

C498A7FB-5A78-4011-9C46-5EE305A5CE37.jpeg

F85E88C7-E5FB-4C64-B696-F17F17937EF4.jpeg

  • Like 4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...