Brettwhite Posted January 31, 2020 Share Posted January 31, 2020 I have an R34 Gtt running 750bhp it has a forged RB30 bottom end with a neo head. The head currently has Tomie poncams type a fitted and thats all.the mods it has in the head Im looking at fitting a set of camtech 272 duration 9 lift cams with tomei springs Does anyone have any experience with these cams and also what changes should i expect from.the car power and delivery wise. Are there any other drop in cams worth looking at Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/ Share on other sites More sharing options...
KiwiRS4T Posted January 31, 2020 Share Posted January 31, 2020 What do you use your car for? No I haven't used those cams but I would expect that with tuning you will get a small power increase with the power shifted to the right (higher revs) so great for track car or drag car but probably a downgrade for a street car. I would think 750bhp on a 2wd car would keep your wheels spinning already! 1 Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7923820 Share on other sites More sharing options...
Brettwhite Posted January 31, 2020 Author Share Posted January 31, 2020 (edited) Hi mate, its a Street and track day car. She doesnt get launched as traction is an issue but 2nd gear upwards she shifts pretty quick if you change right you can get it done without a lot of slip. Shes fun ?? Im.currently revving to 9k Im hoping with the cams and the change from 3" downpipe to 4" downpipe ( turbo is a 4" v band hot side and goes straight to 3") i should get some nice drivable gains, the current 3" downpipe wont let the car boost past 1.4bar as its restricting flow and blowing open 50mm wastegate, shes struggling to breath right now Edited January 31, 2020 by Brettwhite Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7923833 Share on other sites More sharing options...
GTSBoy Posted January 31, 2020 Share Posted January 31, 2020 Do dump. Don't do cams. Save that for later if you still think you need more. 2 Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7923836 Share on other sites More sharing options...
Dale FZ1 Posted February 5, 2020 Share Posted February 5, 2020 On 1/31/2020 at 8:27 PM, Brettwhite said: I have an R34 Gtt running 750bhp it has a forged RB30 bottom end with a neo head. The head currently has Tomie poncams type a fitted and thats all.the mods it has in the head Sounds like a weapon. Must be nearly tractionless! Car pics in your intro thread look good, lot of work involved as many here on SAU can testify. Could you post up in the RB30 dyno results with sheets? It helps bring things together, allows easier comparison of setups. Being from UK, were you quoting 750 "derived" crankshaft hp, or is that at the wheels? Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7924262 Share on other sites More sharing options...
BK Posted February 5, 2020 Share Posted February 5, 2020 9k rpm in an RB30 ? with stock valve springs in a neo head? With shim over bucket ? With Tomei type A cams which are 252 duration ? Hmmmm....ok. 1 Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7924263 Share on other sites More sharing options...
Old man 32 GTR Posted February 7, 2020 Share Posted February 7, 2020 Maybe it’s 9k indicated on the taco? Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7924403 Share on other sites More sharing options...
Brettwhite Posted February 8, 2020 Author Share Posted February 8, 2020 Link ecu shift light is set at 9k max rpm is 500rpm more. Revs forever Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7924470 Share on other sites More sharing options...
Brettwhite Posted February 8, 2020 Author Share Posted February 8, 2020 This is the dyno before the injector seal was fixed. Ill find new dyno sheet later as not got it digital Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7924471 Share on other sites More sharing options...
Brettwhite Posted February 8, 2020 Author Share Posted February 8, 2020 Shes booked in in 2 weeks to have the new 272 cams, valve springs, 4" turbo back exhaust and crank cam trigger kit fitted Then full remap Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7924473 Share on other sites More sharing options...
Dale FZ1 Posted February 10, 2020 Share Posted February 10, 2020 If you want more high rpm breathing capability, those mods should push things that way. If you're currently running it to 9000, based on the dyno sheet, begs the question of why? It's done its best by 7000 and torque is falling at that point. Sticking with a stock RB30 crankshaft, or have you spent on a fully counterweighted crank? 2 Link to comment https://www.sau.com.au/forums/topic/479653-rb30-cam-question/#findComment-7924580 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now