Jump to content
SAU Community

Recommended Posts

so probably been beaten to death, I apologize.

 

so in a nutshell for a 30 swap in a r34 GTR. I would need to:

get the awd adaptor

drill a hole for an extra tensioner

and make the crank collar longer?

will the getrag bolt on directly to the motor?

am I missing anything else? Are there instructions on where to drill the hole for the tensioner?

Link to comment
https://www.sau.com.au/forums/topic/479957-2630-build-questions/
Share on other sites

Yes, Yes, no necessarily (longer oil pump drive is desirable not required), not exactly (the lower bolt holes will be off between the sump and gearbox by the height of the awd adapter. depending on how much that troubles you I've seen some people just leave the lower bolts out, my gearbox was redrilled for the new lower bolt locations.

The rb30 pdf guide has information on tensioner options, and depending on the block you get you may already have to location for the tensioner machined, or you may need to get that done. There can also be differences on whether the required oil feed and returns are in the block or whether you have to drill and tap them

beyond that, motor prep is like any other rebuild (you can decide how far to go), and things like radiator hoses will not fit directly and will need modification.

And finally, I think it is a terrible idea to put an rb30 in a R34 GTR these days. Start with something people don't care about like a 33 GTR instead (no one cares about middle children).

3 hours ago, Duncan said:

Yes, Yes, no necessarily (longer oil pump drive is desirable not required), not exactly (the lower bolt holes will be off between the sump and gearbox by the height of the awd adapter. depending on how much that troubles you I've seen some people just leave the lower bolts out, my gearbox was redrilled for the new lower bolt locations.

The rb30 pdf guide has information on tensioner options, and depending on the block you get you may already have to location for the tensioner machined, or you may need to get that done. There can also be differences on whether the required oil feed and returns are in the block or whether you have to drill and tap them

beyond that, motor prep is like any other rebuild (you can decide how far to go), and things like radiator hoses will not fit directly and will need modification.

And finally, I think it is a terrible idea to put an rb30 in a R34 GTR these days. Start with something people don't care about like a 33 GTR instead (no one cares about middle children).

I had a built rb26 with a t88. Unfortunately dumb shit started to happen and I got the car stolen and it came back with a blown motor and turbo. But I stumbled on a rb30 
 

thank you for the information Do you have a link to the PDF on hand? Or a thread with your build?

2 hours ago, KiwiRS4T said:

Or you could just buy one...(from short block to complete engine)

https://www.ripsracing.com/catalog/Complete-Motors-40/Complete-Engine-Package-32.html

Totally an option if it wasn’t an arm and a leg to ship the motor from there to here. I was looking at a spool short block at one point 

  • 11 months later...
1 hour ago, mugiwara no luffy said:

will there be clearance issues with the bonnet and the block.

Some have had issues, I did not (R33).  Mate, custom engine fitting requires an optimistic ' suck it and see approach" my 25/30 went straight in, I could have dicked around for hours making mounts beforehand that would not have been required.

3 hours ago, Rusty Nuts said:

Some have had issues, I did not (R33).  Mate, custom engine fitting requires an optimistic ' suck it and see approach" my 25/30 went straight in, I could have dicked around for hours making mounts beforehand that would not have been required.

Ah nice. I heard there was no clearance issues but I wanted to make sure. 
 

now to compensate for the extra height I need to modify the down pipe, intercooler piping, and radiator hoses correct?

5 hours ago, mugiwara no luffy said:

Ah nice. I heard there was no clearance issues but I wanted to make sure. 
 

SOME have had clearance issues, block height is about 20mm higher, my point was you will not know until you check after fitting.

On 2/23/2021 at 2:53 AM, Rusty Nuts said:

SOME have had clearance issues, block height is about 20mm higher, my point was you will not know until you check after fitting.

Thanks for the info 

I just bought some spacers from prp just in case

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, does anyone know how I can, or can a moderator remove this advertisement please.  Has been sold a long time ago and would like to remove references. Thanks. 
    • There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
×
×
  • Create New...