Jump to content
SAU Community

Tial Sport Q with RB25

Jason062100
 Share

Recommended Posts

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
26 minutes ago, KiwiRS4T said:

Its rated for "up to 1,800hp" so should be adequate for your needs. Then again some people run no BOV....

But he's American, no BOV = blown motor and exploding birds.

tridentt150v Grand Master

tridentt150v

Posted
Posted

Above 400hp?  So an external wastegate setup?  if so, I'd be asking about your mani, wastegate type and spring rate way before a BOV.

I'd also save my $$$ [spend it on real improvements] and stick with the standard Nissan BOV.

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
1 hour ago, tridentt150v said:

I'd also save my $$$ [spend it on real improvements] and stick with the standard Nissan BOV.

They don't like big boost, tried pushing 1.5bar into one it cracks open so deleted it.

But he's American, they believe if you don't run a BOV your motor and turbo will explode.

tridentt150v Grand Master

tridentt150v

Posted
Posted

Ok, well depends on the interpretation of big boost I guess.  I have a std BOV with a different spring setup [so long ago I can't remember what spring I used, but it was changed, I remember doing the maths for it and the WG spring back then] and its working fine. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) clogged cat

      By GabsReDeal · Posted

      Appreciate the feedback. It is street car, but not a daily. Last week I got a quote from a good exhaust shop for a decat, one which is bolt-on, bolt-off to be easily replaceable. I got quoted for around €150. I usually do push the motor, but I wasn't in this case to make sure that no damage is done until I get the cat sorted. I think it's best to also ask the exhaust shop for the other option and see what they can do. If (big if) I were to decat though, would it be best to tune the car or would the stock ECU handle it? As far as I know, the stock ECU is not tunable and that would require additional purchases.
    • Milkmun
      R32 GTS (RB20DE) clogged cat

      By Milkmun · Posted

      As above, definitely bash it or get it replaced with a high flow unit.
    • niZmO_Man
      R34 Gtt Wheel Offset Advice

      By niZmO_Man · Posted

      get some flares on them, or wider guards haha
    • Watermouse
      Hypergear Turbochargers and High flow Services Development thread

      By Watermouse · Posted

      Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
×
×
  • Create New...