Jump to content
SAU Community

Recommended Posts

Hey everyone,

I’m looking to increase the boost on my R34 GT-T series 2 and I was wondering what the easiest way to go about it would be.

I’ve found a few threads and it seems like the stock turbo can go to around 11 PSI safely? My car is a series 2 with the Garrett turbo, can these be boosted higher?

What would I need exactly to get started? I’m not looking for a full setup, and would prefer something quick and easy for now.

Thanks

Welcome to the wonderful forum.

This has been discussed a billion times and is the simplest thing ever in the world of older  turbo cars.

get a manual boost tee. There it is. The answer. Then google how to install boost tee. Then put it on.

37 minutes ago, viper2002 said:

I was wondering what the easiest way to go about it would be.

 

27 minutes ago, Ben C34 said:

Get a manual boost tee. 

The easiest way is to remove the pressure reference source off the wastegate. Free power mod 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

........... Ben is spot on and since I am bored here is a link to install one
 

 

I think the installation should be quite straight forward, my only concern is getting the right boost level. Is there a good tutorial for this around?

Many of the tutorials I have found don’t go into detail, aren’t for the R34 or have broken images and links, hence posting here.

17 minutes ago, viper2002 said:

I think the installation should be quite straight forward, my only concern is getting the right boost level. Is there a good tutorial for this around?

Many of the tutorials I have found don’t go into detail, aren’t for the R34 or have broken images and links, hence posting here.

No exact way, each boost tee/car is diffrent. Need to drive the car and I generally use 4th gear up the highway.
start at 2 clicks and go from there.
Back when I started playing with turbo cars (2003/4ish) there were no tutorials and we didn't have the internet where i lived. Good old fashioned she be right and lots of broken stuff later...... 
Upping the boost on a stock car isn't really going to gain anything decent the scheme of things.

  • Like 1
1 hour ago, viper2002 said:

I haven’t found any topics for what boost level is safe on the Series 2 Garrett turbos.

 

There is no Garrett turbo. There is a Hitachi turbo. There is nothing Garrett about it.

The safe boost limit for the turbo is not important. That's because the ECU will shit itself and make your life miserable before you even get there. FWIW, the ceramic turbine on the stock turbo is likely to self destruct at any boost over 12 psi. Might last years at 12 psi. Might die the next day. At 14 psi, it might also last years, or might die on the first boost run. It's a lottery, best avoided by not exceeding 11 or 12 psi.

As to the rest of the car, the stock ECU will start making the air fuel ratio ridiculously rich as you go over 10 psi (stock boost is 7). By the time you're at 11 you're probably going slower than when you were at 9. The ECU will also pull timing more than a 14 year old with a Hot 4s magazine with a slapper draped over a Honda on the cover. That will also contribute to the slows.

And to top it off, as you get up towards about 12 psi the ECU will do horrible things like completely cut the ignition when it reckons the signal from the AFM is too high, or if it detects too much from the ECU's boost sensor. There are NO WORKARUNDS for this that do not involve dealing directly with the ECU. You can Nistune the ECU, or you can replace it completely. But you have to do it if you want more.

And.....all of this has been posted on these very forums about a billion times. So I don't know why I have repeated it.

  • Like 1

I have the money for a full system, but I’m not going to drop 5k when that can be spent on my Viper instead.

All I wanted was a quick way to increase the boost for my 34 which is daily driven. Is an aftermarket boost gauge necessary? Or would the stock one be enough for a ‘close enough’ reading?

A boost gauge is not needed at all. Turn the boost up until it goes slower and blows huge plumes of black smoke. then turn it up a little bit more. If the turbine doesn't explode into little fragments that you can collect as souvenirs from the cat converter, then turn the boost up a little bit more.

  • Like 2

Pretty sure there is actually a Garrett S2 turbo, like all S2 stuff it is mind alteringly rare though.

The TLDR is this isn't worth it, there is no easy fix, and the stock ECU is son of rajab and master of all. If you want to max out the stock setup to any real degree the ECU is the place to start, but unfortunately a combo of stock turbo, stock intercooler, stock injectors, stock fuel pump, stock exhaust, stock air intake, all of this is really not rated very much above stock power at all.

And of course if you change it all, the sky is the limit.

The GTR's can make more on stock gear because the stock [all of the above] is far more capable, but still behind any aftermarket offering in [all of the above]

It's not worth doing basically - Car is worth more sold if there's a Viper in the garage lol.

1 hour ago, Kinkstaah said:

Pretty sure there is actually a Garrett S2 turbo, like all S2 stuff it is mind alteringly rare though.

The TLDR is this isn't worth it, there is no easy fix, and the stock ECU is son of rajab and master of all. If you want to max out the stock setup to any real degree the ECU is the place to start, but unfortunately a combo of stock turbo, stock intercooler, stock injectors, stock fuel pump, stock exhaust, stock air intake, all of this is really not rated very much above stock power at all.

And of course if you change it all, the sky is the limit.

The GTR's can make more on stock gear because the stock [all of the above] is far more capable, but still behind any aftermarket offering in [all of the above]

It's not worth doing basically - Car is worth more sold if there's a Viper in the garage lol.

1786908306_images(12).jpeg.14fa3be353fb340be3dcf3fc75b25509.jpeg

1 hour ago, Kinkstaah said:

Pretty sure there is actually a Garrett S2 turbo, like all S2 stuff it is mind alteringly rare though.

Yuh, but....... whilst they might have had a Garrett compressor cover, I thought that they were still the same Hitachi core, with the same ceramic turbine and nylon compressor - which is something that Garrett themselves weren't f**king with at the time.

My Series 2 did indeed have a stock Garrett turbo. It had a alloy compressor wheel but had a ceramic turbine wheel. I've got a few pictures of it saved somewhere - it had OP6 cast into the exhaust housing

With a front mount intercooler, 3" exhaust and nistune it made 190kw at 10psi. It made next to no gain at 12psi, so we kept it at 10

I had good success with the Turbo Tech boost valve (still use one today)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
    • Pretty sure they run the same engine as the Q50 hybrid which specifies 95 RON.  I ran 98 in mine for a while, but it made no difference in performance or economy, so I have been using 95 for the last few years.  I have never hit 6.0L/100km, but have returned mid to high 6 on the highway.  Being a hybrid, fuel economy is a lot more dependant on how you drive it.  At 110km/h, mine never goes into EV mode on the highway, so returns closer to 7.5L/100. urban driving can return low 8s if you are careful or over 10 if you are a bit more enthusiastic on the throttle.
    • About a quarter of what you want to do. It's only R7R, not R&dismantle&replaceparts&reassemble&R. ? It is stock. I already told you, you will NOT have broken those. It's f**king 4th gear for Christ's sake. You just chipped the teeth off.
×
×
  • Create New...