Jump to content
SAU Community

Recommended Posts

Hi All,

Sort of a humble brag masquerading as useful information. Whilst almost every other part of my car is currently falling apart, apparently the engine is in pretty good condition. My bro'-in-law just did a compression test on it (for reasons, explained below). The compression tester in question shall be regarded as being 100% trustworthy (for reasons, explained below).

Anyway, engine with well over 150000 km (I can't be bothered doing the sum required to work it out right now) tested at 175 psi on all cylinders. Nice.

We should consider that to be a reference compression test reading for a good Neo.

 

The story. Bro'-in-law comp tested an RB20 last week that had 3 at 115, 2 at 100 and one at 90, or something like that. Could not believe it because there was no signs of low compression in the way it behaved. It started quick and clean, drove perfectly, didn't smoke a lot, made decent power (for an RB20). So with some suspicion now placed on the comp tester, he compared it against 3 different digital manometers and it came up the same on all of them. So the gauge itself got a clean bill of health. Wanting to prove out the hose and fittings and such, he did the test on my (known to be pretty good) engine, which proved that the comp tester appears to be totally reliable. Thus, the RB20 is pretty buggered, and my engine is doing really well.

 

  • Like 1

I'll add to your humblebrag, my own vanilla rb25 tested at 175psi across the board (warm) when i purchased the car 5-6 years ago on a accurate comp tester with a similar story. Engine was totally stock, stock boost. 60k kms on a Nismo cluster, so probably 200k kms.

 

5-6 years later of 310rwkw and over 30 track days, a couple of smashed gearboxes, a dead turbo and many many sets of tyres and brake pads. The engine recently comp tested at 160-165psi (cold) on the same gauge. I suspect that would increase a few psi at operating temp.

 

And they say rb's are weak. End humblebrag. Now that I've said that, I'll start researching rebuilds as the inevitable will likely happen very soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...