Eric0 Posted May 27, 2020 Share Posted May 27, 2020 Hello! Lucky me, I’m mostly asking this question to see if I should stop driving my car or if it’s okay. As I was bringing the front of my car off the jack, the frame slipped, and my jack pushed my radiation up up up up and cracked my fiberglass hood. It also bent my harmonic balancer pulley on my RB25DET where the power steering belt goes just a little bit, looks more like a scrape but does have a little bit of a bend. Should I be concerned about the pulley? I have driven for a day, did a couple of highway pulls in 3rd, cruises, everything feels okay, maybe a little shaky but it could be my own paranoia! Haha. Thank you! Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/ Share on other sites More sharing options...
WantGTR Posted May 27, 2020 Share Posted May 27, 2020 If its 'a little shakey' as you say, piss it off. Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931774 Share on other sites More sharing options...
GTSBoy Posted May 27, 2020 Share Posted May 27, 2020 I wouldn't be worried about that little bend much. I would be worried about what other effects there might have been from dropping the weight of the car onto the balancer/crank as a whole might have done. Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931775 Share on other sites More sharing options...
Eric0 Posted May 27, 2020 Author Share Posted May 27, 2020 26 minutes ago, GTSBoy said: I wouldn't be worried about that little bend much. I would be worried about what other effects there might have been from dropping the weight of the car onto the balancer/crank as a whole might have done. Well, the radiator has a huge dent on the bottom where most of the weight went. Plus, my radiator has metal brackets at the top bolted to the chasis to keep it from moving so that also took some weight. I read online that 3rd gear carries the most load and if the hormonic balancer is bad then that’s when I would experience some symptoms buuuut everything seems fine. But yes, I suppose time will tell if something internally went wrong. I freakin hope not, I just rebuilt it! Yikes! Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931777 Share on other sites More sharing options...
Eric0 Posted May 27, 2020 Author Share Posted May 27, 2020 36 minutes ago, WantGTR said: If its 'a little shakey' as you say, piss it off. That’s fair, I’m probably just being too paranoid. Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931778 Share on other sites More sharing options...
Ben C34 Posted May 27, 2020 Share Posted May 27, 2020 1 hour ago, Eric0 said: I read online that 3rd gear carries the most load and if the hormonic balancer is bad then that’s when I would experience some symptoms buuuut everything seems fine What? Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931782 Share on other sites More sharing options...
Eric0 Posted May 27, 2020 Author Share Posted May 27, 2020 44 minutes ago, Ben C34 said: What? I could’ve easily misread. Sorry if I said something dumb! Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931784 Share on other sites More sharing options...
Eric0 Posted May 27, 2020 Author Share Posted May 27, 2020 I went out on a drive and I feel the steering wheel shaking more than before the incident after 60mph. It could be my rotors. Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931785 Share on other sites More sharing options...
GTSBoy Posted May 27, 2020 Share Posted May 27, 2020 Or you could have done something bad to the front end. Loading it via the radiator will put unpleasant forces into the radiator support panel, which is not supposed to carry any actual loads. May have pulled the front ends of the chassis rails inwards. Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931787 Share on other sites More sharing options...
trel Posted May 27, 2020 Share Posted May 27, 2020 (edited) Rev the car to 1500ish and look out for a wobble in the steering wheel and gear knob when stationary. The balancer wobble of death. You could try to fix it but pay close attention to the keyway on the crank snout. If you've damaged that no matter what you do it will always come back loose. Fingers crossed for you. Edited May 27, 2020 by trel Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931789 Share on other sites More sharing options...
tridentt150v Posted May 27, 2020 Share Posted May 27, 2020 I'd be removing the harmonic balancer and setting up a dial gauge and checking the crank snout for any run out. Then throw the HB away and put a new one on just for peace of mind...damn sight cheaper than using it and waiting for/watching the action. Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931792 Share on other sites More sharing options...
Eric0 Posted May 27, 2020 Author Share Posted May 27, 2020 5 hours ago, trel said: Rev the car to 1500ish and look out for a wobble in the steering wheel and gear knob when stationary. The balancer wobble of death. You could try to fix it but pay close attention to the keyway on the crank snout. If you've damaged that no matter what you do it will always come back loose. Fingers crossed for you. I revved up my engine and the steering wheel doesn’t wobble at 1500+ just vibrates the same as if it was idling. On the shift knob, there’s more vibration there when the car is revved up but that might just be normal for my car. Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931804 Share on other sites More sharing options...
Eric0 Posted May 27, 2020 Author Share Posted May 27, 2020 I decided to remove the engine and inspect the crank, bearing, and all that good stuff just to be sure. I’ll update this forum once I have more information about the damage or no damage. Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7931809 Share on other sites More sharing options...
Eric0 Posted September 28, 2020 Author Share Posted September 28, 2020 On 5/27/2020 at 2:03 PM, Eric0 said: I decided to remove the engine and inspect the crank, bearing, and all that good stuff just to be sure. I’ll update this forum once I have more information about the damage or no damage. Okay! It’s been a few months and the car is back on the road! That accident I had completely threw the sixth beating out of line and was very quickly causing damage to the crank. it has been rebuilt again. 2 1 Link to comment https://www.sau.com.au/forums/topic/480486-hormonic-balancer-bent-should-i-be-worried/#findComment-7940942 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now