Jump to content
SAU Community

Do all R33 GT-R's have rear window wipers ?

Serious-Seven
 Share

Recommended Posts

Laurence Mentor

Laurence

Posted
Posted

No, absolutely definitely not. As far as I can see there is no pattern to it.

I have seen V-Specs with and without

Non-V-Spec with and without.

They were obviously just an option (or a delete option).

Though I guess N1's don't have them...

meshmesh Mentor

meshmesh

Posted
Posted

Are you sure it's not because they may have busted the rear windscreen & not bothered with the expense to replace the rear windscreen to factory specs with room for the wiper?

Our GTR has it...

http://www.skylinesaustralia.com/forums/at...achmentid=20027

EVL R33 Experienced

EVL R33

Posted
Posted

I'm pretty sure rear wipers were an option on the whole range (maybe not N1's), my old GTSt didn't have one, and didn't have the controls on the stalk either so it wasn't a replaced rear window jobbie.... Like most things skyline, it seems you could pretty much create whatever you wanted by checking or unchecking the boxes from the factory... Having said that I have not noticed any 33 GTR's in my area without a rear wiper.....

Brett

Laurence Mentor

Laurence

Posted
Posted
Are you sure it's not because they may have busted the rear windscreen & not bothered with the expense to replace the rear windscreen to factory specs with room for the wiper?

Absolutely positive :D

If you were being tight like that then why would you change the wiper stalks or get blanking plates for where the rear wiper controls sit (I don't know where it is)

N/A® Experienced

N/A®

Posted
Posted

Im sure all 33 gtr have them. Positive on N1's not having them. Had to purchase a washer bottle from nissan recently and they only listed 2 part numbers. GTR/Vspc or N1.

N1 didnt come with a second pump.

Whilst on N1, did anyone know that the N1 bonnet is actually different from the rest of the GTR? :)

Fly_With_Sky Rising Star

Fly_With_Sky

Posted
Posted
Mine hasn't got one either, though I wish it did because it shits me when its been raining and it's hard to see out the back.

i agree with the fact that it is hard to see out the back when it rains and all the water sits on the window and doesnt move. my car has one and im happy it does because of the stated reason. So, i thought that it would have been standard... :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...