Jump to content
SAU Community

Recommended Posts

I have a 1996 R33 rb25det 

I have searched everywhere and I see a lot of topics on this but nothing has really helped me

First off I was having idle issues on start up. It was sitting around 500rpm so I changed my. Bov back to recirc starts good now. But still sitting around 700 which is fine..

But hadn't fixed properly. I'm still having problems coming to an intersection sounds like it's idle hunting. And it'll drop back down to 0 then bounce back up. I just have to keep the revs up to stop it from dieing. 

I've cleaned the iacv and adjustig the screw and that didn't do anything at all I've checked for vac leaks and nothing. My thought was maybe the maf but that's sweet. 

If anyone can help will be appreciated. 

Thanks:)

Edited by Kaden
Link to comment
https://www.sau.com.au/forums/topic/480675-idle-problems/
Share on other sites

Hi Kaden,
When I had this exact problem in my 33 I cleaned the IACV and adjusted the TPS. (I had already given her fresh plugs, serviced the air filter and cleaned the AFM etc to eliminate anything else) In the end I put some tape around the IACV screw and then adjusted accordingly and finally she retained her idle after a lot of perseverance.....hoping this may be of assistance.

-jess

Link to comment
https://www.sau.com.au/forums/topic/480675-idle-problems/#findComment-7934604
Share on other sites

May I ask?

What did the tape do?

I mean I've tried adjusting it doesn't seem to change anything. also which way did you turn it?

I probably should say it has new slpitfire coil packs and new spark plugs also. But that shouldn't be a problem. it's the same set up as my mate had and he never had a problem. 

Edited by Kaden
Link to comment
https://www.sau.com.au/forums/topic/480675-idle-problems/#findComment-7934627
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I believe mine is helical and not clutch type. During drifting one wheel was spining as if it was open diff so bought kazz 1.5 way and has sat on my shelf for the past 5 years as I want to learn shiming process and do it myself   in meantime thought I change the diff oil hence post here. So any 75-90?   i am pretty sure r34 are helical not clutch lsd as standard . That is gtt ones
    • Throw between gears are so much that is getting annoying. I have pro short shifter on my mx5 and e36 and love it . Skyline is getting unbearable    would syncro issues and short shifter is no no? Anyone mind explaining a little on why before i buy cube
    • No. Well, some people "seem to use redline shockproof in the diff". Most do not. I would only contemplate it if you have badly worn CW&P gears. And no. No-one in their right mind has ever put ATF into a diff. Any normal diff/gear oil of the right viscosity will do. Whatever takes your fancy. Castrol, Nulon, Penrite, Redline MT range. Whatever. It's just gears. 75W-90 or 80W-90 is typical. I think that GL-5 is hard to avoid these days, although I think that a GL-4 is probably preferred, given the vintage of the equipment. At least Redline offer a number of GL-4 oils. If you have a clutch type LSD instead of the VLSD, then of course you need a proper LSD oil. Anything from any of the same names above. If you have a helical LSD, then it does not require LSD oil, and the recco is the same as for the VLSD. You don't want the LSD friction modifiers in the oil for a non-clutch type LSD if you can avoid it.  
    • You may want to list it up for a little higher - This price is much lower than you may realize. Here you're pretty much selling to people who most likely already have these things on their own rigs. S chassis people eat this stuff up like you'd not believe.
    • I had my car for over 10 years and done around few thousand miles but never changed the oil. thinking of changing it.   what brand and viscocity would you put in ? people seem to use redline shockproof in the diff   on  contraty seen others using atf dexron 2 or 3 so wanted to check. is it 1 liter?
×
×
  • Create New...