Jump to content
SAU Community

Rb25det no compression on 3 cylinders sometimes on cold start

Steve07
 Share

Recommended Posts

Steve07 Newbie

Steve07

Posted
Posted (edited)

Hey guys 

I am new here.

i have an r33 sitting in my garage for the last 10 years that I start every now and then.

recently when start the car it just turns over like there is no compression, if I leave it and come back the next day it starts with a missfire for a few minutes and then runs on all 6 cylinders fine.

i performed a compression test (cold).  It had zero compression on cylinders 1 , 2 ,6 .

Has anyone else had this issue.

thanks 

steve 

 

Edited by Steve07
robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

lifters or valve spring issue? 

Guessing it's not been driven under load or had fresh oil in that time? 

Best to remove cam and timing covers to inspect the valve train. 

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
23 minutes ago, Steve07 said:

Yes that’s right, I changed the oil for the first time in 5 years a couple of weeks ago,  I was thinking of using an oil flush product in the oil to help.  
If that does not work I will start pulling it apart 

Bit of ATF if you have nothing else....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Milkmun
      Cleaning my wheels 😍

      By Milkmun · Posted

      Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • niZmO_Man
      Duncan's V37.......race car?

      By niZmO_Man · Posted

      Modern oils are amazing. Add tyres to that as well.
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      It's more like on average the things I see a lot of things going wrong. Yes, usually the people who reach out are the ones who are having problems but on average it feels like mechanics and tuners here aren't really competent. I swing between thinking my standards are just way too high and wondering whether people really are just this dumb. I just had the strangest 10+ reply argument on a Facebook group over someone insisting that the factory R34 GTT boost control solenoid reduces boost pressure to 5 psi when it's on and raises boost pressure to 7 psi when it's off despite showing the exact plumbing in the factory service manual and the solenoid behavior detailed in the FSM.
×
×
  • Create New...