Jump to content
SAU Community

Recommended Posts

a couple of Doberman's / Rottweiler's that havent been fed in a while....

In all seriousness though, i think the best security are them posts that you bolt to the floor in between the car and the garage door.

And possibly an elaborate kill switch of some sort thats truly hidden away.

Edited by DaymoR32
  • Haha 1
3 hours ago, Mathew1988 said:

Hello all

Just wondering what people recommend / using for a security alarm system for a BNR34 GTR Nur please?

Kind regards,

Mathew

 

If your in Sydney I've used a guy, recommend from here, that could sort the car part out.

I cannot remember his name but if you want I can PM his number

That is for alarms and GPS and stuff.

The best security is to keep your location on the downlow and use the alarm gps stuff as the last layer of security.

The first layer is not letting people know where the car is

The second is area/access (home) security 

The third is cover (garage and car cover)

The fourth is hard obstacles (bollards)

The fifth is an car alarm and GPS

That keeps it nice and safe (ish) at home even when your not

  • Like 1
On 7/28/2020 at 9:47 PM, Mathew1988 said:

Hello all

Just wondering what people recommend / using for a security alarm system for a BNR34 GTR Nur please?

Kind regards,

Mathew

 

if its locked up, autowatch did a decent unit - 457 RLI and the GPS unit to go with it. whoever does it needs to BURY both units. if the have the lower dash off only then it means the average joy rider will have it disabled in 30 sec. when I did these (search the forum for my name) it was a 2 day affair usually and I charged accordingly. dash completely out , unit buried and fully integrated into the harness and OE relays used for the disable points. even those were hidden well. I retired (not by choice) in early 2017 and do GPS telematics in the USA now for Verizon/Vodafone.

On 7/29/2020 at 1:31 AM, mlr said:

If your in Sydney I've used a guy, recommend from here, that could sort the car part out.

I cannot remember his name but if you want I can PM his number

That is for alarms and GPS and stuff.

The best security is to keep your location on the downlow and use the alarm gps stuff as the last layer of security.

The first layer is not letting people know where the car is

The second is area/access (home) security 

The third is cover (garage and car cover)

The fourth is hard obstacles (bollards)

The fifth is an car alarm and GPS

That keeps it nice and safe (ish) at home even when your not

^^ correct.

where I live (I am in Texas)  there are only a few people that know where my R31 and F31 are kept. Only two people that know how the start the R31. myself and the mechanic that I use to work on it. (I stay too busy now to maintain the thing.) both cars have full time remote monitored GPS by a monitoring company.

 

8 hours ago, Chris Rogers said:

^^ correct.

where I live (I am in Texas)  there are only a few people that know where my R31 and F31 are kept. Only two people that know how the start the R31. myself and the mechanic that I use to work on it. (I stay too busy now to maintain the thing.) both cars have full time remote monitored GPS by a monitoring company.

 

Want to install an autowatch 573 for me when the time comes?

  • 3 weeks later...

I no longer do car security :) . may focus of work now is with Verizon Telematics in the USA where I now live.
573 is a dongle and hasn't been available in australia for a number of years. last one I sold was in 2014.

On 8/20/2020 at 12:29 PM, joshuaho96 said:

I'm in the US, I think you can still buy one in Canada.

that changes things. if you are TX - then yes I will do it. far better to do a 457 though. I can set that up so only a tow truck will move that car. actually you could do a 674 as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • careful when running the car after a boil over. Ive heard you can lose enough coolant that it won't show the right temps because of too much air in the system (or something like that). Make sure the levels are good before trying again.  Maybe a mobile mechanic can come have a look with their scan tool ?
    • OK, just for some extra clarity - there is more than one option at Frenchy's. 1. You can buy the whole kit - with or without the actual compressor. The whole kit includes mounts, hoses, condensor, etc. That's either ~$2200 or ~$2800. No surgery required with this option. 2. You can buy just the bracket (~$600), or the bracket with the compressor (~$1200). Either of this or the above option "without the compressor" is if you already have an Echo comp or you are able to source one locally. Whatever the case, in this option, you will need surgery done on your hoses to adapt to the new compressor. When I said "the Frenchy's kit", I meant the whole kit in option 1. It is obviously somewhat more $$ than a $1500 OEM compressor. But if I had to spend $1500 on an OEM compressor, I would certainly consider spending double that to renew and significantly update everything forward of the firewall. Another option is to rebuild your original compressor. My R34 comp is currently dead and I will be most likely doing that to it if the spare one in the shed is also leaky.
    • I’m thinking that’s the route I’ll  go, thanks for the input!
    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
×
×
  • Create New...