Jump to content
SAU Community

Recommended Posts

Hi guys

now with this lockdown in melbourne, bored at home, i thought i work on the skyline.

the car used to start about 2-3 years ago, i havent start it since,

today i went to start it, it wont start,

now i put a new battery in,

the car crank, its trying to start but just wont turn over.

my 1st thought is fuel, so i fuel up about 7litres of fuel and try start but it wont.

so i try a fuel starter, sprayed it into my air filter and try start but nothing it just crank....

 

now im thinking maybe my spark is no good?? if thats the case how can i check it? before i go ahead and change it, as its not a small job changing a spark on an rb25.

 

other thing im thinking is maybe fuel filter is clog? if thats the case is it hard to change 1?

i dont think its the fuel pump because when i try to start it it cranks afew times then i went back to open the fuel cap and there was pressure.

 

Try not to be intimidated working on the car, you said changing plugs is a big job - but it is quite simple really. Take your time, take photos as you go, if your still worried, bag bolts and components and label the bags (then reassemble in reverse order). 

A few simple things to try, you can use a mechanical fuel pressure gauge to see if your pump is supplying enough fuel pressure to the rail. Put the pressure gauge somewhere between the rail and fuel filter. 

You can use a spark plug in-line checker to see if your getting spark. 

Both tools are cheap and easy to use. If your unsure, you can youtube and see how to use them. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
    • I was surprised to see all the quick Jack models at the same prices on there. But yeah, grabbing one at 20% off would be great.
×
×
  • Create New...