Jump to content
SAU Community

Recommended Posts

Good morning everybody. I’ve searched on this and can’t find anything on my specific problem. So I’m having a slight “annoyance” with my drivers door lock. The driver door will not lock/unlock by the switch (but the passenger door works just fine). Manually locking the door via the key or inside the car will lock the door (and the passenger side door). Now, the really annoying part is from the time I start the car to the time I shut it down, every 3 or 4 seconds the driver door lock attempts to actuate. This doesn’t always happen, but happens enough to drive me crazy when driving with the windows up. I should add that the speed sensitive auto locks have never worked. I was thinking of snipping the green wire at the brain to disable the feature altogether, hoping this would remedy my problem, but I wanted to find some more information before I decided to do that. Any thoughts? Car is a 95 GTS25T S1 without keyless entry or any type of alarm. Thanks!

Hmmmmm . . . . check the drivers side door window control unit.

Some one may have replaced it with a later model one out of a series 2 and fiddled with the electrical wiring to get it to work.

From memory a Series 1 has a 9 pin plug and a Series 2 a 11 pin plug . . . or was it vice versa ? ? ( oh my Oldtimers disease is at maximum at the moment ! )

I'm sure some one on here can confirm that.

 

1 hour ago, PLYNX said:

Hmmmmm . . . . check the drivers side door window control unit

Thats actually the Power window amplifier part number 28515-15U00 the small smd relays fail inside. Very common. All three  of my family S1 R33's have failed with various problems but same unit. New they are $270 plus freight.

Edited by Rusty Nuts
spelling

So could that have something to do with a very “loose” driver window switch? You even look at the switch and the window goes down. Also, the driver window works most of the time, but when I’m putting up both windows at the same time, the driver door sometimes waits a few seconds before working  

Also, what is the purpose of this amplifier, exactly? 

Edited by LiteraCola

"Loose drivers switch" part of the button has broken away on the inside button itself.

This holds a small white plastic spring loaded pin.

Pop the button of carefully, after taking the unit out, and look for the broken plastic bits, clean out the lubrication grease with ethanol and super glue ( I believe it called crazy glue in the US ) back together.

Bit of a fiddly job and you may have to put a small piece of supporting plastic in to stop it breaking off again . . . . or you can buy a whole new unit for a gozillion dollars !

1 hour ago, LiteraCola said:

what is the purpose of this amplifier, exactly?

The signal itself from the switch is low voltage/current not sure which. the signal operates the relays in the amplifier which switches the main supply to the door locks and window motors

  • 2 weeks later...

Alright, so during my door speaker swap, I decided to try and tinker with this loose window switch. I removed the switch panel, popped off the window switch and a small piece of plastic fell out. I cleaned up all the grease with brake cleaner (on a cotton swab) and used some of the DevCon Plastic Welder stuff I “borrowed” from work a hundred years ago. I let it dry over night and tried to slide the pin back in. It was pretty tight so I tried to sand down some of the glue. That didn’t work, so I sanded the plastic pin just a smidge. Lubed it up and slid it in (giggity). All is well; my switch isn’t loose anymore, and I don’t hear the constant “clunk clunk” inside the door while driving. Two birds with one stone? 
 

My drivers door lock switch still doesn’t work, but that’ll move down the priority list since there’s a nifty manual lock bottom less than a foot away ??‍♂️

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Whoa, that's a name I've not see for a long time! Sorry to hear about the engine / turbo damage.  Fwiw with any engine problems it often really a case of just seeing what happens when it's apart, ymmv - I wouldn't rule out the possibility that the damage isn't even from the turbo failure, or possibly from a combination.  The airflow between cylinders isn't dead even, injectors can go off over time as well, with the turbos overboosting if you didn't have upgraded fuel system there could have possibly been a bit of leaning out - stock triggering is often a bit unreliable by this age too.  Basically its an old engine and a few things could have been going on, and you won't know how much work is needed until the engine is apart.  
    • I'm just shocked there's a euro driver on our roads who is thinking of other road users and not attempting to blind everyone. I wonder if Prank uses his indicator too...
    • Its hard to tell really. The Q50 owner's forum talks about it a lot and has quite a few people directly affected, but no idea what % of cars sold actually had the block replaced. Also, there seem to be 2 distinct issues which both get diagnosed by Infiniti as requiring a block replacement (no wonder they are going broke) 1. "Porous block" where coolant mixes with oil through thin or poorly cast parts of the block 2. Head coolant gallery plugs not sealing. If I was noticing engine coolant loss I'd start with cooling system pressure test (as always) and then I'd pull the cam covers and reseal the coolant gallery plugs on both side before worrying about a potentially porous block.  If neither of those did the trick it would be put in a second hand engine out of japan; I haven't checked pricing but I'm sure there are plenty around by now as they've been in production 10+ years
    • To clarify what I posted above, I thought you both had a situation where it cancelled sooner one way than the other.....if it is reasonably even where it cancels in either direction that is probably normal (consider gentle movements like lane changes, you don't want it to need half a turn of lock to turn the indicators off)
    • Son, in this country, that is a piece of Gyprock. f**king drywall. FFS! I also like the autocorrect of trailer to tablet. I was reading it and thing, "what the hell drugs is he on?" Then the photo made it clear enough.
×
×
  • Create New...