Jump to content
SAU Community

Recommended Posts

My car has developed a whiff of burned oil note from the exhaust.

It's not not using any excessive oil or producing blue smoke, is there a way to isolate whether it's the turbo or the engine?

No oil visible on the compressor inlet. (from the engine cover vent)

Inlet manifold is clean as well.

Spark plugs look clean, compression is good on all cylinders.

Engine is almost standard with hybrid turbo and low mileage.

 

Cheers ...

 

 

 

 

 

 

 

Link to comment
https://www.sau.com.au/forums/topic/481217-a-whiff-of-burned-oil-r33gtst/
Share on other sites

What do you mean by low mileage? Has it been rebuilt, or does the odometer not show many klm (ie likely wound back)?

By this age, it would be common to have worn valve stem seals. They tend to be noticeable when first driving after the car has been sitting a while (as oil from head gets past seal into cylinder while stationary).

A compression test is the starting point to work out if you have an engine sealing problem. If there is, a leak down test can help tell you where the issue is. Turbo seals are generally not "a whiff", more like a wacky racers smoke screen

Hybrid turbo....as a general rule if you are producing more power then you will use some oil, its a fact of life.  I'm not sure where it starts to burn oil [and would change with each motor anyway] but probably around the 200-250rwkw and increases with power output.  As a rough guide 300rwkw would be approx 1/2 to 1 litre per 1000km.

  • Haha 1
  • Confused 1

Hi ..

Thanks for the replies

By low mileage I mean 86,000km! I owned the car for 12 years and the Ks are genuine.The car is sadly rarely used, I bought it with 72,000km on the clock.

It's one of the last made S2s and traffic here is so horrendous that it's mostly not worth driving in the city @ 5 - 40 km/h and zero boost.

Yes, I was thinking maybe valve stem seals but it's hard to ascertain since it's not blowing any blue smoke. If it was I could just close the throttle at higher rpm and in gear to see if anyting is being sucked into the combustion chambers via stems / seals.

I will have to take a look at the turbo's oil return feed too and also see if there's anything wrong in terms of play etc.

As for oil usage, I've driven around 1,500km and according to the dip stick there was next to no oil 'missing'

 

 

 

 

 

 

 

 

 

 

 

 

 

16 hours ago, tridentt150v said:

As a rough guide 300rwkw would be approx 1/2 to 1 litre per 1000km.

I'm almost at 300rwkw and burn zero oil. Adding 1l per 1000km you would almost do two oil changes before your oil change is actually due. I'd consider 1l per 5000kms borderline. Only time I've seen engines burn that much oil is when they were on their death bed or bubba did something funky with his crankcase ventilation or turbo oil return. 

 

Unless you swapped in a 2 stroke or a rotary, I'd look into fixing that. 

Edited by TurboTapin
  • Like 1
42 minutes ago, TurboTapin said:

Only time I've seen engines burn that much oil is when they were on their death bed or bubba did something funky with his crankcase ventilation or turbo oil return

Or....just about every modern engine with really thin, low tension rings and 0W oil.

But for an RB, agreed.

29 minutes ago, GTSBoy said:

Or....just about every modern engine with really thin, low tension rings and 0W oil.

But for an RB, agreed.

Manufacturers state normal oil consumption for warranty reasons. If any modern car was burning 1L of oil per 1000kms, they would all be bankrupt due to warranty work. Think of it, that's anywhere between 8-15L added between oil changes, depending on the manufacturer. 

 

Cheers. 

  • Like 1
1 hour ago, TurboTapin said:

Manufacturers state normal oil consumption for warranty reasons. If any modern car was burning 1L of oil per 1000kms, they would all be bankrupt due to warranty work. Think of it, that's anywhere between 8-15L added between oil changes, depending on the manufacturer. 

 

Cheers. 

Yeah. Have you heard of the Subaru FA engine? Half the Euros are just as bad. They burn more oil than the Gulf War did.

Duncan is spot on.

Cars don't like sitting. I would drive it for a bit and see if it fixes itself.. or... maybe run a good quality seal rejuvenator like the Liquid moly stop leak or something like that. then drop it out and run your normal oil and see where your at.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh... literally every time i jump on a forum, see an instagram post or see an engine bay at a car show, i get an idea and add it to my 'to do' list. So what started off as, hey can u just make a couple of intake hard pipes because my dumbass bought the wrong apexi kit, blew out into a 2 week job including braided brake lines & custom bash kit for the front lip haha.  Getting Luke from A4E engineering to make a full custom exhaust with a controllable aes dump valve so i can actually switch between quiet and loud, because right now its just loud all day every day. Then after that go and get the tune redone flex e85 & 98 as i get bugger all milage from e85, makes going for longer drivers difficult
    • Car looks clean as. You ended up getting quite a bit done 😂  So what's the plan for the exhaust? 
    • The only Neo rods that were any different to any other RB25 rods were the DET ones, and they were the same as RB26. Here is a Neo DET rod. O5U part number visible. Here is a post in a thread here on SAU with evidence from someone who has done this before. There are photos in the thread of normal RB25 rods.  
    • Sure, but why assume that will be the case forever? And why assume you'll be able to do an oil change to swap back to a stock drain bolt before that happens? And does it even matter when I change the oil at fairly short intervals? Life can be funny sometimes and unexpected things can happen. Like breaking a collarbone so you can't do any work on your car for a few months but the oil change is due so you have to take it to somewhere and hope they don't do something stupid like stacking the new drain plug washer on top of the old one.
    • Do u know how to identify the rods are rb25 or neo ones? Can u look into the pics and tell me is they de or de neo ones. Its confusing becoz my motor has de neo head but block is 25de 75t, so really confusing me about rods, crank.
×
×
  • Create New...