Jump to content
SAU Community

R32 Skyline - Help.

ryand96
 Share

Recommended Posts

ryand96 Apprentice

ryand96

Posted
Posted

So it seems i've unfortunately purchased an absolute sh*t show. I'm hoping someone can help me with my issue or shed some useful advice. Car is fitted with aftermarket alarm (not 100% sure that's the issue). Car also has a brand new wiringspecialties engine loom for an RB20det. 

I've had loads of wiring issues with my car since the start, there's a turbo timer, boost controller gauges etc all powered off what was the radio.

Currently, my indicators, brake and dash lights don't work, however my headlights do. I've now also got an issue with my starter signal only being 6volts instead of the full 12, so not getting crank either.

What also might not of helped, is my mate has put the battery in the wrong way round at one stage, which i think also possibly caused some of these issues. 

I have also been offered an interior loom from an automatic, would the interior side of this be the same as a manual?

 

I know there's a lot of issues, but i appreciate any help or at least a starting point to check. I've checked the fuses and all looks ok. Fuel pump still primes as well to add to the confusion 

Link to comment
https://www.sau.com.au/forums/topic/481306-r32-skyline-help/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

Whether the interior loom is the same or not (probably is), that is unlikely to resolve the issue.

Best suggestion might be to take it to an auto electrician and get them to sort it, but will cost somewhere between "a bit" and "heaps" because there will be lots of tracing involved.

Alternatively if you have the time and patience to sort through it yourself, you need to get the R32 GTR workshop manual which includes the RB20 wiring diagrams and work through everything from the power supply circuits. The battery connection issue will have blown at least one fuse and sounds like it has also caused some issue with your key barrel or it's wiring (or possibly ECU fried, depending where you detected 6v)

  • Like 1
ryand96 Apprentice

ryand96

Posted
  • Author
Posted
  On 16/10/2020 at 2:32 AM, GTSBoy said:

There were auto Type Ms. It's not like Type M means anything particularly special. It's not the Vspec of GTSts.

Expand  

Thanks! I'll have to check my VIN, as i thought it was a factory 20det. Could potentially explain the issues with the new loom?

  • 3 weeks later...
Ben C34 Grand Master

Ben C34

Posted
Posted
  On 14/11/2020 at 3:18 PM, ryand96 said:

Right, so I've sorted the P/n bypass, and have now got spark and a crank, fuel feeds to the rails.

Only thing I'm not getting is the injectors fueling. Any ideas of what to look at for this? 

 

When spinning the cas can hear the injectors click/buzz 

Expand  

Check you have the feed and return to the rail the correct way around

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...