Jump to content
SAU Community

Need help with ID’ing a water hose

IM-32-FK

By IM-32-FK,
in Engines & Forced Induction

 Share

Recommended Posts

IM-32-FK Mentor

IM-32-FK

Posted
Posted

Hey guys one of my water line hoses busted and is spraying water everywhere. I tried to find the specific OEM hose but am having a hard time ID’ing which one it is. RB25det neo- It’s a short hose maybe 8-10cm long with a slight bend towards the back of the engine. It sits just below the triple AAC valve hoses, adjacent to two large thick hoses. The hose itself connects to a ribbed plate running the whole length of the engine, which has the injectors mounted onto them. The video shows the specific hose and here is a link to the engine water hose diagram for rb25det neo. Thanks

https://nissan.epc-data.com/skyline/er34/3952-rb25det/engine/211/

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 GTT idle problem

      By joshuaho96 · Posted

      Adjusting the idle screw is usually (emphasis on usually) just covering up deeper issues. Stuff like the cold start valve not closing properly. Throttle shaft seals on the way out. Coolant temp sensors getting out of spec. Coolant temp sensors especially can be a bear to diagnose because they can fail subtly. My dad just spent weeks chasing down his high idle. He cleaned the coolant temp sensor and everything but the resistance curve just drifts over time and if it's been 20+ years they also get super slow to respond as well. Has a massive effect on fuel economy as if it's off the ECU is going to run richer and command high idle for far longer than it should otherwise.
    • MBS206
      R34 GTT idle problem

      By MBS206 · Posted

      How old is the battery, it's more likely your battery is on its way out.
    • PranK
      Cleaning my wheels 😍

      By PranK · Posted

      I reckon you'd get 90% off. My washer doesn't get between spokes very well. Haha! I love my Gerni!  Argh! Steam cleaning has its place for sure.
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Hey all, I did a voltage test with the car (video attached) not running for 3 days. And here is some interesting stuff: - Battery voltage is 12v (I had the key in the ON position) - Drops to 9.76v while cranking then quickly goes up to 14.5v - You will notice there was a sorta slow start but not as slow as it usually is. - Idle surprisingly was better at just over 1,000rpm instead of 1,100 rpm. - I turned on the A/C, radio and headlights in the video and the voltage remains the same - I haven't cleaned the grounding wires on the chassis yet, that's next. - Battery drops to 12.6v when I turn off the car and wait a bit Seems like I might have a parasitic draw? I do have an immobiliser system which does drain the battery more of course but was wondering if there is anything else I should be looking at fixing? Does the ground wires on the chassis have anything to do with the low 12v?        SAU.avi
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      My lord that is some low oil pressure as minimum in the manual! I guess the big part will be seeing how it changes as the engine gets more spirited use.
×
×
  • Create New...