Jump to content
SAU Community

Recommended Posts

29 minutes ago, Super Drager said:

Lol mate ive had it apart and the specs match the real thing. If you don't want one then don't buy one, i'm giving first hand experience since i own one. 

I wasn’t having a go, I was asking a genuine question. Wanting to know what you were comparing it to, going from stock turbo to one of these, similar Chinese- Chinese turbo, u have driven the name brand equivalent with exactly the same set up as yours?

what’s the context of what you were comparing to say it works fine. 

it’s a turbo sucking air into a motor so yeh it works “fine” but is it making target boost at the right time? Laggier compared to what it should be? 

8 minutes ago, UWISSH! said:

I wasn’t having a go, I was asking a genuine question. Wanting to know what you were comparing it to, going from stock turbo to one of these, similar Chinese- Chinese turbo, u have driven the name brand equivalent with exactly the same set up as yours?

what’s the context of what you were comparing to say it works fine. 

it’s a turbo sucking air into a motor so yeh it works “fine” but is it making target boost at the right time? Laggier compared to what it should be? 

I cant say for my setup as im running mine in a compound setup and rear mounted. However a friends xr6t has gone from a gcg gtx35 to a pulsar and its exactly the same power and spool wise. 

On 16/11/2020 at 3:41 PM, khezz said:

Does anyone here use any of their products or know of anyone who does?

There are a few quick reviews on other forums and a few videos on YouTube. So far every comment is positive. All the reviews say they are well machined, balanced on both ends, well assembled turbos. Yet they are less then a 3rd of the price of a precision or a Garrett.

Would be great to hear some first hand experience.

Thank you

7.jpg

They are awesome! Really good quality in machining and materials and perform better than expected. I have a comparison between Garrett GTX3582R Gen1 1 and Pulsar 3566 for what it's worth.

18 hours ago, infomotive said:

They are awesome! Really good quality in machining and materials and perform better than expected. I have a comparison between Garrett GTX3582R Gen1 1 and Pulsar 3566 for what it's worth.

Can we see it? 

21 hours ago, infomotive said:

Really good quality in machining and materials

Just curious, I am assuming this is based on the very scientific eyeball ? I can’t see how you could determine material quality accurately, and I have assumed you haven’t actually measured anything either 


 

Knock offs can work good, everyone knows that. They can also have wildly varying quality and break in unusual ways

  • Like 2
1 hour ago, Ben C34 said:

Just curious, I am assuming this is based on the very scientific eyeball ? I can’t see how you could determine material quality accurately, and I have assumed you haven’t actually measured anything either 


 

Knock offs can work good, everyone knows that. They can also have wildly varying quality and break in unusual ways

Don't you dare use common sense in this discussion! 

Just remember turbos are an afterthought and nobody ever builds a turbo car and anticipates a turbo upgrade... 

1 hour ago, Ben C34 said:

Just curious, I am assuming this is based on the very scientific eyeball ? I can’t see how you could determine material quality accurately, and I have assumed you haven’t actually measured anything either 


 

Knock offs can work good, everyone knows that. They can also have wildly varying quality and break in unusual ways

Your assumptions are third rate. When you assume you make an ass of you and me...

Visual inspection and disassembly of components by a competent tradesperson gives valuable insight.

Axial and radial clearances check out and when monitored are not changing with harsh conditions like 2 bar boost and no BOV. Drilling and tapping housings for anyone with a little experience reveals quite quickly the quality of the material.

If you have ever tightened a compressor cover bolt on a cheap turbo you will know it can be a tentative affair, not so on these.

Threads are perpendicular to machined surfaces etc etc. Fasteners are good. V-band spigots are perfect. They weld perfect. They don't distort. They exceed expectations in quality, reliability and performance.

There a a few minor details that are being improved as with any product.

They are not for everyone. Some people will never be able to accept anything other than name brand and don't have the ability to do their own research and testing. And that's ok.

 

Hope this helps the OP

  • Like 1
  • Thanks 1

Haha I made an ass of you an me

oh well. 
 

I can also tell how good metal is by the colour of the sparks, but in the end it is a fairly wild guess isn’t it without proper metallurgy?

 

what are the minor details being improved?they seem quite relevant

9 hours ago, Ben C34 said:

Haha I made an ass of you an me

oh well. 
 

I can also tell how good metal is by the colour of the sparks, but in the end it is a fairly wild guess isn’t it without proper metallurgy?

 

what are the minor details being improved?they seem quite relevant

Material specification is the same as what Garrett use except for 713c Inconel only on the turbines, no Mar-M option at this point.

Interestingly, I have replaced a Garrett Gen 2 GTX3582 that melted a hole through the turbine housing and damaged the turbine etc with a Pulsar equivalent. I supplied on the condition of no warranty as the customer was unwilling to fix the issues leading to the failure. The Pulsar turbo has against all odds survived, so far.

Just cosmetic details.

 

On 1/11/2021 at 8:09 PM, Super Drager said:

Lol mate ive had it apart and the specs match the real thing. If you don't want one then don't buy one, i'm giving first hand experience since i own one. 

Should put the comp wheel on a scale and see how much it weighs compared to a Garrett. Would also be interested to see real world back to back tests on things such as boost threshold/ lag/ transient response etc. The cheaper turbo might match in physical dimensions, but that doesn't mean it's going to be as good as the real thing.

2 hours ago, djvoodoo said:

Should put the comp wheel on a scale and see how much it weighs compared to a Garrett. Would also be interested to see real world back to back tests on things such as boost threshold/ lag/ transient response etc. The cheaper turbo might match in physical dimensions, but that doesn't mean it's going to be as good as the real thing.

As i said, if you don't want one then don't buy one. If you think a theoretical miniscule variation in weight of the compressor or turbine wheel is worth paying triple what i paid for mine then more power to you. I'm more than happy with my poor-mans turbo.

What i find funny is that people on her wank over mamba/kinugawa but when another (much better) turbo comes along you won't even take someones positive feedback on it. 

  • Like 1
3 hours ago, infomotive said:

Material specification is the same as what Garrett use except for 713c Inconel only on the turbines, no Mar-M option at this point.

Interestingly, I have replaced a Garrett Gen 2 GTX3582 that melted a hole through the turbine housing and damaged the turbine etc with a Pulsar equivalent. I supplied on the condition of no warranty as the customer was unwilling to fix the issues leading to the failure. The Pulsar turbo has against all odds survived, so far.

Just cosmetic details.

 

Mate i wouldn't bother any further, they seem content not to listen to first hand experience so there's no reason to continue trying to explain anything. 

  • Like 1
On 1/13/2021 at 10:41 AM, djvoodoo said:

Should put the comp wheel on a scale and see how much it weighs compared to a Garrett. Would also be interested to see real world back to back tests on things such as boost threshold/ lag/ transient response etc. The cheaper turbo might match in physical dimensions, but that doesn't mean it's going to be as good as the real thing.

I can tell you what will happen..they will be the same..they would be made by kts...the biggest makers of billet wheels in the whole world..most places get there stuff made there..a lot claim as there own..Its piss easy to make a comp wheel exactly the same..its not even expensive..they are like $120 a piece(or where) if you buy one with a kts trade account

Thats all they do..kinga/mamba they are all kts to

Sorry guys..but these turbos are the shit.....china has stepped it up on a new level

Maybe the only complaint will be the bearing system is not up to scratch with the german etc stuff..but for most people..they wont do that many kms anyway...failing that..you can buy these turbos with aus built quality cartridges already...expect to pay another $1000..still cheap..a g42 for $2500...

Edited by jet_r31
  • Like 3
On 1/12/2021 at 6:11 PM, Ben C34 said:

Just curious, I am assuming this is based on the very scientific eyeball ? I can’t see how you could determine material quality accurately, and I have assumed you haven’t actually measured anything either 


 

Knock offs can work good, everyone knows that. They can also have wildly varying quality and break in unusual ways

Ask tao...looks like he is using all same housings etc now...

  • 6 months later...
  • 3 weeks later...
On 11/08/2021 at 11:08 AM, The Mafia said:

Has anyone used the Pulsar SXE range? Any results? I am keen to try one. Specifically the S369 and S372.

Thanks :)

Best bet is to check some US forums, i know a lot of mustang guys run bigger pulsar turbos and have good results. 

  • 2 years later...
On 11/17/2020 at 6:02 PM, Mick_o said:

You had to take it too literally didn't ya? 🤦‍♂️

The turbo is 100% a critical part as it determines the powerband of your engine, the drivability of the car, but its also a critical part that determines the engines reliability/longevity. 

If turbos are an afterthought does that mean if you build your motor  you can just bolt on 1300hp turbo onto the side of it? None of the other internal components need to be a little different? 

Pretty dumb huh? 🤔

people like that never get it, never will.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...