Jump to content
SAU Community

Bluetooth Issue - My-Car not appearing - 2007 V36

eastsideroy
 Share

Recommended Posts

eastsideroy Rookie

eastsideroy

Posted
Posted

Hi guys, trying to suss out the Bluetooth in my car but it seems something is wrong with it.

when I go to pair my phone, my-car does not appear on the pairing screen or my phone. You can see what I mean in the images attached it says “*”, when it should be saying “my-car”.

Any help appreciated

C92064AA-0DFC-4526-AC7D-0BE7F6C78581.jpeg

B4AA2943-8CF1-41E2-9559-C7B075FC4D36.jpeg

The Max Mentor

The Max

Posted
Posted

I had no idea our vehicles had a "root" button. To think all this time I was paying for it!

Anyway, on a serious note, it seems that the Bluetooth ID of your vehicle has been overwritten by the previous owner (or yourself when sifting through the various settings). You can change that name again though I'm struggling to remember which submenu option it was in the Bluetooth menu. I'll get back to you on that.

nickcorr Proficient

nickcorr

Posted
Posted

Yes pretty much you are looking for * in the bluetooth pairing on your phone..

I have also attached the instructions for the V36 audio that I think you were looking for.

v36-translation2.pdf

eastsideroy Rookie

eastsideroy

Posted
  • Author
Posted
10 hours ago, nickcorr said:

Yes pretty much you are looking for * in the bluetooth pairing on your phone..

I have also attached the instructions for the V36 audio that I think you were looking for.

v36-translation2.pdf 3.76 MB · 1 download

Ahh okay, so must be a different problem then as I’m not seeing * pop up on my phones Bluetooth. Could it be because I’m using iPhone X? I seen somewhere that later model phones don’t pair with skylines system.

eastsideroy Rookie

eastsideroy

Posted
  • Author
Posted

Damn I got no other phone atm. Would you have any idea why my bluetooth would not be appearing? I've followed the guide setting passcode, entering my phone number etc but no success. Here’s what my Bluetooth info looks like, anything look wrong there?

BA6A1F24-1DF5-4E6B-9637-A6A6662E490C.png

01FACF25-1880-4DB6-9460-3592F8028AA5.jpeg

The Max Mentor

The Max

Posted
Posted

I suspect the asterisk for the Bluetooth name is an illegal character for Apple perhaps. I still haven't had the chance to go through the menus and determine where you can change the name back to my-car or whatever else you want to call it but that would be the first place I'd look for troubleshooting.

  • Thanks 1
colin.ssc Mentor

colin.ssc

Posted
Posted
On 02/12/2020 at 4:51 PM, eastsideroy said:

Ahh okay, so must be a different problem then as I’m not seeing * pop up on my phones Bluetooth. Could it be because I’m using iPhone X? I seen somewhere that later model phones don’t pair with skylines system.

I had an iPX and it was connecting fine for me. I'll try tonight with my iP12 and see if it still works. I gave up with BT audio since it sounded so eh.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      Weird compression after rebuild

      By EndZee · Posted

      I can also smell fuel in oil if that helps. 
    • EndZee
      Weird compression after rebuild

      By EndZee · Posted

      Hello, after engine rebuild(new cylinder liners and piston rings, arp headstuds, metal cometic tripple layer gasket, all new main/rod bearings) and roughly 100km made I did measure compression and it’s (1-6) - 80, 60, 90, 120, 110, 135. It’s rb25det series 1 - hydraulic lifters. Measured on cold engine. Didn’t check on hot due to overall car problems such as broken 3rd gear, idle issues, misfire etc. I did smoke test only on 2nd and 5th cylinder bcs soldering iron used with this method broke itself. So after setting cams to side - side 90 left/right angle I can see smoke coming off from intake manifold and turbo exhaust flange. 5th didn’t notice any smoke. Shop did head, valve etc job but I assemble it by myself. So I thinking about lifters. I don’t remember if they were soft or not it was long time ago. In my opinion I didn’t bleed them and they can be opened more than they should be. Can it be more likely possible? Or timing can be off by 1 teeth and can cause such weird compression? But if timing would be out wouldn’t it be like such big difference across all cylinders? Please help I’m so sad it happened. 
    • sunsetR33
      newbie attempts the GTR life.

      By sunsetR33 · Posted

      Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • codygrimm27
      Attesa pump mount options / ideas? R32 gtr style.

      By codygrimm27 · Posted

      Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
×
×
  • Create New...