Jump to content
SAU Community

Recommended Posts

  • 6 months later...
Back again. This one's gonna be a little pic heavy, so bear with meimage.gif.6a6106353b2514602deacdfb30e01806.gif😉
 
Last post I mentioned that I was going back to Japan in October for R's Meeting and that I would finally be driving my own R34 for the very first time, and that's exactly what I did! Unfortunately though leading up to the trip, even with just a few days to go before leaving for Japan, it wasn't clear the car would be shaken'd/reg'd/and ready for me to pick up/drive, because of acute communication issues from the person handling all of it. Luckily things were sorted out, but the miscommunications resulted in me having to pick up the car in Tokyo, instead of the car being back down in Gifu waiting for me like originally planned.
 
I wasn't alone though, as my good friend Kendan was with me the whole way from Narita. Once we finally made it to the parking garage, I was getting rather nervous as it hadn't quite sunk in that I was gonna be walking up the ramp of the garage to see my car for the first time in the wild, literally. But as we walked up...there it was, in a poorly lit parking space right in the middle, ready to turn the keys and run south into the night. It was a moment I won't forget and really, the whole trip was surreal and doesn't truly feel like it happened. I believe I shared the moment on IG stories. But man....what a feeling that was.
 
After quickly looking things over, we packed our gear into the car, went down the block to get a tank of fresh and then set out onto the Expressway heading south. It's hard to put into words what it felt like for the very first drive...of my own BNR34...all I know is I had a huge stupid grin on my face the whole time -until we ate a very filling CoCo curry dinner and I about passed out!- and kept saying to Kendan "that's my f***ing RB!", which of course for him is nothing new as he now has three GT-Rs....:cool2:
zBG7WFc.jpg?2
 

B1os2yi.jpg

 

What's suuuuper fortunate about the first drive, is that for jumping into a car on the other side of the world and immediately driving 4hrs, we didn't experience a single issue with the car and it performed just fine, though we weren't pushing it all. I didn't want to do any sort of pushing until I could go over the car more closely over the next few days. Once we did I felt a little more confident giving it the beans.
 
And let me tell you....the car is quick, responsive and gets the lead out. It's clear the previous owner took care of it and got a decent tune on the FCon V Pro. There's still a ton to do to the car with replacing and refreshing parts but for how it stands, I was pretty pleasantly surprised with how it all felt. Cautiously optimistic I will remain!
 
Once we got everyone together in Gifu, the gang headed north while I stayed behind to do some more to the car and fit some bits on. After that, I went up Tokyo way to meet them and from there on out we did so much driving and picture-taking; it really was jam-packed every day up until the last day everyone was together as a group. Trying to herd cats, something, something.....
k5Jf1sH.jpg?2
 
SzksGwm.jpg?3

 

sQYbb0w.jpg?1

 

d65XtcD.jpg?11
 
This is all of us at Omori Factory as a group, pretty cool.
YqWLNxO.jpg?1
 
We then went to Mine's after Omori, which was pretty awesome getting to share with my guys and seeing their reactions to the newly-restored Hondemo before the major public getting to see it at R's. I had seen it before at Niikura-san's house, during my first trip in Feb of 2023, which was pretty special indeed. It was great to be back at Mine's and they showed all of us great hospitality. Niikura-san went to go look at our cars in the parking lot next to HQ; he's a true enthusiast of these cars and it's reassuring to see that he still has the passion after all these years. Nakayama-san even gave me some of his time to look at my car and talk options. He is almost completely sure that my car has HKS GT-SS turbos as we tried to look as close as we could. He's looked at thousands of setups, so I'm inclined to believe him...
p0HNFYi.jpg?7
 
m1HwTP4.jpg?1
 
Over the weekend we made our way south to Fuji Speedway for R's. Sunday was the event, and let me tell you, for those who haven't been...it's impressive to be there. So many things going on, cars attending, stuff to buy, etc. It all felt like a blur, but it was a seriously awesome event and I can't wait to go back. Mine and Kendan's cars were invited to be in it at a booth, so we did that. Not too many foreigners can likely say the same with their own cars. It was great to catch up with people I talk to in Japan who are in the same circles, and even though it was a long day as I'd spent the previous night detailing the car 'til 2am, I didn't want any of it to end. Truly a worthwhile experience to make a Japan trip for. Every one of us who hadn't been just had our jaws on the ground haha.
oTVrJzx.jpg?2
 
ZkLuscc.jpg?2
 
vcFopIy.jpg?1
 
2v3LWaC.jpg?5
 
Here's a GTR Magazine-style picture I got. Unfortunately none of us guys were selected to be in the magazine photoshoot, as there were issues with lottery results and all that. Hopefully in there's no issues in the future, but Japan loves their lotteries for selecting people for things🙄image.gif.c55b32782193bbc8ae9a2d36d4711288.gif Then we did a group photo at the entry gates.
rHWhgCn.jpg?1

 

93rIVIJ.jpg?1

 

X5ucgov.jpg?2

 
The next day most of us went our separate ways, as some of us had to head back to the US. It was a bit bittersweet, as we all -mostly!- had a pretty good time together, which is pretty rare for large groups of people. But that didn't stop us from going up to Hakone for some more pics and the view on a perfectly clear day. It's cliche, but pics definitely do not do the scenery justice. Just take my word for itimage.gif.f9c509be52556203cb11209a92a4be9d.gif😛
XwhGip7.jpg?8

 

jvyeXUD.jpg?5

 
I've slowed down buying parts but still on the lookout for things as I still have a lot left to acquire, as well as some big things planned. I do intend to go back to Japan twice in 2024; once for a big plan related to the car, and then to go back for R's again! It was so good I have to do it all again. That's all for now, stay tuned for more!
 
'til later
Edited by BaronOBeefdip
  • Like 7
  • 3 weeks later...

Thanks man! It was a cool moment for sure. Apparently we made it into a Sammit video or something while we were taking pics at the entrance and he drove by. Dunno don't watch his stuff anymore😆

Edited by BaronOBeefdip
  • 1 month later...
  • 8 months later...

Realized I haven't been back here in a while. Still here, still alive, still waiting for the car. 

I went back again the only time last year from Oct-Nov for R's Meeting and drove it around some more, including a few laps on Fuji Speedway(in the wet, sadly). The car still feels good, but have a couple small things to address. I've been getting more parts but have slowed down still, and most of the bigger purchases are now out of the way.

I find myself getting impatient more and more when it comes to getting started on this project; it's quite hard for me not being able to really dive in and start making this car my own because it's halfway across the world. At times it doesn't even really feel like I own one of these.

Haven't really been motivated or had the desire to document the last trip on here or social media for, well, reasons... but here's some pics...it's also still alive and well as you can see:

spacer.png

spacer.png

spacer.png

I've narrowed down to the last large part purchases(anything over $2k) before the engine build to be:

1) Ohlins Road & Tracks

2) ATS Twin Carbon clutch

3) Endless BBK with some custom options

and 4) Kansai Service carbon driveshaft

I don't think the budget exists for all of these this year, but I'll try for one or two items I think. Though, every time I look at my spreadsheet I sigh, shake my head, and get depressed just that little bit more. 

'til later.

  • Like 2

Just checked in first post and you should be able to bring it home November this year, right? I'm amazed you made it through four years of this. As hard as it feels now the rest will go by in a breeze in hindsight, I'm sure.

  • Like 1
1 hour ago, BaronOBeefdip said:

Realized I haven't been back here in a while. Still here, still alive, still waiting for the car. 

I went back again the only time last year from Oct-Nov for R's Meeting and drove it around some more, including a few laps on Fuji Speedway(in the wet, sadly). The car still feels good, but have a couple small things to address. I've been getting more parts but have slowed down still, and most of the bigger purchases are now out of the way.

I find myself getting impatient more and more when it comes to getting started on this project; it's quite hard for me not being able to really dive in and start making this car my own because it's halfway across the world. At times it doesn't even really feel like I own one of these.

Haven't really been motivated or had the desire to document the last trip on here or social media for, well, reasons... but here's some pics...it's also still alive and well as you can see:

spacer.png

spacer.png

spacer.png

I've narrowed down to the last large part purchases(anything over $2k) before the engine build to be:

1) Ohlins Road & Tracks

2) ATS Twin Carbon clutch

3) Endless BBK with some custom options

and 4) Kansai Service carbon driveshaft

I don't think the budget exists for all of these this year, but I'll try for one or two items I think. Though, every time I look at my spreadsheet I sigh, shake my head, and get depressed just that little bit more. 

'til later.

I know mentally you're set on the ATS clutch but honestly I'm a big fan of the Nismo Super Coppermix Twin. It's much cheaper and in some ways I think it's a better design for a street/circuit car.

2 hours ago, soviet_merlin said:

Just checked in first post and you should be able to bring it home November this year, right? I'm amazed you made it through four years of this. As hard as it feels now the rest will go by in a breeze in hindsight, I'm sure.

Yeah, that's when. I guess you could say I'm as patient as I am foolish(or just a masochist?🤔). I've strongly considered throwing in the towel and calling it all quits many times, and have almost done so. It's a first-world problem for sure, but I've had a pretty rough go of it, as well as other factors; hoping something good comes of all this; it has to.

56 minutes ago, joshuaho96 said:

I know mentally you're set on the ATS clutch but honestly I'm a big fan of the Nismo Super Coppermix Twin. It's much cheaper and in some ways I think it's a better design for a street/circuit car.

It definitely is half the price of the ATS and performs great, but I'd like to try something different for once. I've sampled the ATS in a friend's 32 and it's solid👍

You have (externally anyway) a lot of patience!  At the very least your patience has rewarded you financially even if you decided you were over it!! :)

I only just read your first experience of seeing the car, that would have been amazing!  Well documented too!

It must be exciting knowing there's only 10 months left until you can get it on a boat and on it's way!!!???

  • Like 1

I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story...

Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger.

It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.

My purchase experience was no where near as glorious as yours but still a significant moment in my life!

Yeah that's a bit of a dilemma as to whether you bring it back or not!  Obviously a massive waste of time and effort to bring it back if you're only going to move there anyway!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
    • While it is a very nice idea to put card style AFMs into the charge pipe (post intercooler, obviously), the position of the AFM and the recirc valve relative to each other starts to become something that you really have to consider. The situation: The stock AFM is located upstream the turbo, and the recirc valve return is located between the AFM and the turbo inlet, aimed at the turbo inlet, so that it flows away from and not through the AFM. Thus, once metered air is not metered again, neither flowing forwards, or backwards, when vented out of the charge pipe. When you put the AFM between the turbo outlet and the TB, there is a volume of pressurised charge pipe upstream of the AFM and there is a volume of pressurised pipe downstream of the AFM. When the recirc valve opens and vents the charge pipe, air is going to flow from both ends of the charge pipe towards the recirc valve. If the recirc valve is in the stock location, then the section between it and the TB doesn't really matter here - you're not going to try to put the AFM in that piece of pipe. But the AFM will likely be somewhere between the intercooler and the recirc valve, So the entire charge pipe volume from that position (upstream of the AFM, back through the intercooler, to the turbo outlet) is going to flow through the AFM, get registered as combustion air, cause the ECU to fuel for it, but get dumped out of the recirc valve and you will end up with a typical BOV related rich spike. So ideally you want to put the AFM as close to the TB as possible (so, just upstream of the crossover pipe, assuming that the stock crossover is still in use, or, just before the TB if an FFP is being used) and locate the recirc valve at the turbo outlet. Recirc valve at the turbo outlet is the new normal for things like EFRs anyway. In the even of a recirc valve opening dumping all the air in the charge pipe, pretty much all of it is going to go backwards, from the TB to the recirc valve near the turbo outlet. But only a small portion of it (that between the TB and the AFM) will pass through the AFM, and it will pass through going backwards. The card style AFMs are somewhat more immune to reading flow that passes through them in reverse than older AFMs are, so you should absolutely minimise the rich pulse behaviour associated with the unavoidable outcome of having both a recirc valve and an AFM in the charge pipe.
    • Yep, in my case as soon as I started hearing weird noises I backed off the tension until it sounded normal again. Delicate balance between enough tension to avoid that cold start slip and too much damaging things.
    • I'm almost at a point where I feel like changing the alternator. Need to check the stuff you mentioned first though.
×
×
  • Create New...