Jump to content
SAU Community

R34 gtr brembos on gtt rotors?

seriesII
 Share

Recommended Posts

GTSBoy Grand Master

GTSBoy

Posted
Posted
4 hours ago, seriesII said:

does this mean mine are r34 brembos and gtr rotors?

No, because the original would be too small for either rotor. It is possible to bend the cover back away rather than cutting it (that's what I did to put 296 and them 310mm rotors on a 280mm car). The offset change on the disc itself with the Z33 rotor might mean that you don't need to do anything. I can't remember which way the disc moves, but if it moves outward then there's your magic.

  • Thanks 1
NZ-GTT Collaborator

NZ-GTT

Posted
Posted

I have Z33 front calipers and rotors on my GTT and I did not need to do cut the lip on the dust covers. There is just enough room to accommodate them. They may have touched on a few spots which was easily bent away with a flat screwdriver.

  • Thanks 1
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
14 hours ago, seriesII said:

when I cared about sharing knowledge 🤣🤣 ..so gets like that 

Oh you know back then you could have easily bought 350Z Brembo front calipers with used OEM rotors for $500 or less.

A while after I wrote that stupid article the price of 350Z Brembo calipers shot up lol.

admS15 Grand Master

admS15

Posted
Posted
39 minutes ago, Dose Pipe Sutututu said:

Oh you know back then you could have easily bought 350Z Brembo front calipers with used OEM rotors for $500 or less.

A while after I wrote that stupid article the price of 350Z Brembo calipers shot up lol.

It's official now, it's all your fault. Lol🤣

  • Haha 2
NZ-GTT Collaborator

NZ-GTT

Posted
Posted

Yeah I read that article and then went and bought a set of front and rear Z33 calipers with used rotors for $700. I looked into trying to fit the rears but there were no adapters available so got some R33 GTR rears which bolted straight on.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Brake pad Compound suggestion

      By Murray_Calavera · Posted

      @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • MBS206
      Beers and skylines Fatz style

      By MBS206 · Posted

      You miss spelled bearings...
    • Kinkstaah
      Help Understand GTT Boost Setup

      By Kinkstaah · Posted

      Just putting it out there, that's a decent list. You would be better off *not* doing *any* of that and buying someone else's modded car. Like mine. Or anybody else's. Yes it's lotto dependent and all this and that but that 70K (remember, double your guesses) could go elsewhere. Keep it stock, save your money, go lowball @Dose Pipe Sutututu :p
    • GTSBoy
      Brake pad Compound suggestion

      By GTSBoy · Posted

      Does not mean what you think it means. The continual rising coefficient is the coefficient of friction that continues to rise with increasing temperature. Not "rising during a single stop", except inasmuch as the brakes should get hotter during a single stop. The RR would not be the best choice for a streeter. Yeah....no it's not. JAX would rummage around in the "shit pads we use for all shitboxen that come in here" and install those.
    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      @Kinkstaah I've got my list.. but most of them is to do if I ever win the lotto
×
×
  • Create New...