Jump to content
SAU Community

RB25 ISR intake manifold installation

MOTIM
 Share

Recommended Posts

MOTIM Rookie

MOTIM

Posted
Posted

So in my possession is a R32 GTST with a swapped RB25 DET in it. I didn’t do it, I bought it like that. I had to buy a new intake manifold as the old one was made for a RB26 and the TB broke off. I purchased an ISR Manifold with a single TB, which also came with a different fuel rail. Ultimately, it’ll change the entire setup. My issues started when my phone reset itself and I lost all my pics of this project, so I have little to no idea of where hoses are supposed to go, what can be deleted, etc etc. 

 

I was hoping to get some help with both installing this manifold and cleaning up the bay by deleting lines/parts I no longer need. 
 

note:

I have a 4 bolt AAC valve connected to a part (idk the name, it’s circled in the pics) and the new manifold has a 3 bolt setup. 
 

the fuel injectors I have on hand that fits the new fuel rail doesn’t fit the existing plugs in the wire harness (I was thinking of getting adapters from wiring specialties)  

I have new intercooler piping that’s supposed to go with this. 

4C7B55A9-CEB9-4D9E-A5CC-399E877D77DC.jpeg

C2BD917A-E85C-4F15-AB48-28C56F1B4050.jpeg

13ECCB67-E364-40CB-9B08-658B92CDE42D.jpeg

C8510EAF-7E57-414D-B36E-BE8C46E6F023.jpeg

BFE2F202-AD6E-45DB-A52F-2E7E7AE9CA34.jpeg

3CAB9A4B-D3D5-43CF-AB4A-0456F0886E37.jpeg

E675B680-81ED-4D91-84F1-3D1208104C85.jpeg

CEB93DD7-C20E-402B-A066-DA70C653DF5D.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      After drying a few days, time to put her back together 
    • Watermouse
      Hypergear Turbochargers and High flow Services Development thread

      By Watermouse · Posted

      Ahh ok, thanks again for your valued insight Tao
    • MBS206
      R32 GTS (RB20DE) clogged cat

      By MBS206 · Posted

      The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
×
×
  • Create New...