Jump to content
SAU Community

Recommended Posts

So i brought this car a year ago with 250k on it with a blown ECU and a tight cam belt, Fixed that and is was a new car again. The problem has been that the compression cold is 140psi throughout the 6 and once hot they all drop evenly 20psi down to 120psi throughout the 6. its been like that for a year now and hasn't changed. it doesn't use oil really and doesn't fill up the catch can. the k&n filter on the catch can looks abit oily however. There's no noticeable blow by just a puff of white smoke out the catch can when you give it a hard rev.

I haven't done a leakdown test yet I've been putting it off. my question is what causes compression to drop like that? i have no information on the history besides it was owned my crackheads and it sat dormant for possibly more then 5 years. the motor looks super clean for how many km's it has and how trashed the suspension is. the car runs perfect but i can feel the 20psi loss as the car warms up.
i was thinking someone put a thicker head gasket on to drop the cr but that still doesn't answer the compression drop. its suppose to rise isn't it lol.
I've asked many mechanics and they cant explain it.
Hope someone can help!
Thanks.

Link to comment
https://www.sau.com.au/forums/topic/482142-r33-gts25t-compression-issue/
Share on other sites

3 hours ago, blind_elk said:

Have you done a wet compression test?

Its a good idea, but it will confirm worn rings. The suspension didn't get rooted because the crackies drove it to church on Sundays. Or down to Supercheap for new filters, before the car wash.

Edited by Rusty Nuts
additional information
  • Like 1

hmm, its running 10psi atm, iv blown 2 turbos so far going any higher on the stock ones. Im still confused why the compression dropped 20psi just from warming up, and even more so why its 120psi hot and cold a year later. wouldnt it drop down to say 100psi once warmed up if its worn that much in the time iv owned it. if compression should be around 160-170+ and i have 120, shouldnt there be quite abit of blowby?
I forgot to take the crank case vent valve out of the manifold to get a true reading of how much blowby there is, i dc that. i took the catch can hose out and you can bearly notice air coming out, you have to squeeze the hose end and then its enough to feel like a gentle flow of air. 0 smoke. same if you give it a rev.
iv used the same comp tester for years to eliminate getting different readings.

Edited by JasonMate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...