Jump to content
SAU Community

RB25DET high boost issues

Tomak

By Tomak,
in Engines & Forced Induction

 Share

Recommended Posts

Tomak Collaborator

Tomak

Posted
Posted

Hi guys,

I have this problem in my new setup like turbo overboosting but its not overboosting...its just cutting my turbo off for some reasons at high and low rpms at different boost at heavy load. Like its living its own life. One night i dont have issues and can go for 1 hour without problems accelerate all the time on different gears at heavy load about 1.6 bar and after 1 hour of drving the turbo cuts again. Like i dont have a fck clue what it can be....

How is this possible that car accelerates one time clean and other time turbo is failing, like the boost is unstable or something, ??

I put new GTX3071 gen2 two weeks ago because i thought my turbo failured but the new one has the same issues. It only goes clean every time at low boosts from 1 to 1.3bars. When i hit 1.5-1.7 it feels like overboosting at some point. So i have changed the turbo already.

On my manual turbo display i have overboosting set up limits  to 2.0 bars, i run external westgate precision turbo 45mm with 1.0 bar spring. My turbo housing is 0.83 A/R v band and 6boost exhaust manifold. Rb25det engine IS OEM did not any mods to it.

 

 

 

 

Link to comment
https://www.sau.com.au/forums/topic/482180-rb25det-high-boost-issues/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

There's a difference between

  • A turbo genuinely not having proper boost control and overboosting,
  • A turbo making boost on one run and not making boost on another,
  • The ECU or a sensor cracking the shits and not working consistently.

Work out whichever it is, then start fixing that.

Tomak Collaborator

Tomak

Posted
  • Author
Posted

I am using actually LINKG4 but never tried to do any temp corrections by myself and i have hard time reaching my tuner right now. He quit his job. Actually i am in position where i can try to fix it myself or need to pay another tuner for complete mapping from scratch again.

I just went for a run on cold and it was smooth ride for 15 minutes on full loads at 1.7 bar so i guess all is ok with my car just overheating issues at some point.?? Maybe this is because of stronger turbo and i never do any temp corrections before. I had before gtx3071 gen 1 with max hp 550hp and did not have this issues. The problem start to occur more often on gtx3071r gen 2 max 650hp. I mean this gen 2 turbo feels much stronger even when i go only on 1 bar from spring, it has way more potential and its more aggressive.

What corrections should i do in the Link G4 ECU? I need some instructions which parameters to change. Is the log necessary for this operation or not? I need to drive around 1h to get this log saved if this helps with anything. Is this engine temp overheating limiter?

 

Murray_Calavera Mentor

Murray_Calavera

Posted
Posted

Based on how random this has been for you, it sounds like it could be fuel surge. 

By any chance has this been happening when your at low fuel levels, and/or accelerating hard round corners or up hills? 

Getting fuel surge will feel like your hitting a rev limiter or boost cut etc. 

 

  • Like 1
robbo_rb180 Grand Master

robbo_rb180

Posted
Posted
1 hour ago, Tomak said:

I am using actually LINKG4 but never tried to do any temp corrections by myself and i have hard time reaching my tuner right now. He quit his job. Actually i am in position where i can try to fix it myself or need to pay another tuner for complete mapping from scratch again.

I just went for a run on cold and it was smooth ride for 15 minutes on full loads at 1.7 bar so i guess all is ok with my car just overheating issues at some point.?? Maybe this is because of stronger turbo and i never do any temp corrections before. I had before gtx3071 gen 1 with max hp 550hp and did not have this issues. The problem start to occur more often on gtx3071r gen 2 max 650hp. I mean this gen 2 turbo feels much stronger even when i go only on 1 bar from spring, it has way more potential and its more aggressive.

What corrections should i do in the Link G4 ECU? I need some instructions which parameters to change. Is the log necessary for this operation or not? I need to drive around 1h to get this log saved if this helps with anything. Is this engine temp overheating limiter?

 

PM me the tune file and a pc log (all channels logged) of it doing it. 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Looking for a part number for this part here

      By Duncan · Posted

      So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • turboedsloth
      New Wasteland Wa Topic

      By turboedsloth · Posted

    • V35_Paul
      Infiniti Q60 Navigation Update

      By V35_Paul · Posted

      your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • silviaz
      Returning after a long time!

      By silviaz · Posted

      Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...