28x10-17 Hoosier slicks

[HulkR33]

Hello. Anyone now if these will fit Skyline GTR R33?

 

[BK]

Car would have to be pretty high ride height. Never seen anyone run them, but I think you might be pushing it. On a stock R33 GTR body the normal fitment for drag radials or slicks is 26 X 11.5 on a stock R33'GTR R17, which is 275/40R17 in the real world normal tyre speak. You would be better off with these as they are wider, and readily available from MT.

[HulkR33]

18 minutes ago, BK said:

Car would have to be pretty high ride height. Never seen anyone run them, but I think you might be pushing it. On a stock R33 GTR body the normal fitment for drag radials or slicks is 26 X 11.5 on a stock R33'GTR R17, which is 275/40R17 in the real world normal tyre speak. You would be better off with these as they are wider, and readily available from MT.

I have MT 275/40-17 today. Just want real slicks to not put to much strain on the drivetrain. Soft side walls. Any other slicks you can recomend?

[BK]

If you want 17 inch ply slicks the Hoosiers are probably your only choice. Most running slicks go down to 15 or 16 inch wheel to get more sidewall - 17 inch drag slick seems a bit pointless for the sidewall profile.

I think you may have to just try them to find out for everyone ? Anything can be "made" to fit if you're dead set on using them.