Jump to content
SAU Community

Recommended Posts

Im sure you could source a good second hand one, or even better get it reco'ed. I think...is it DBA??/....that place that does brakes and clutches....i dunno Friday after work sucks :)...well yer, they had new parts for my car. Youd be suprised what you can get new for imports these days....their not so rare now, just make sure you ring around for a cheap price :P

Either that or Transteer...damn fine workshop :D

Dean it is the motor not the rack (thank god :D)

Joel enough out of u :(

Umm ok I will c about getting it rebuilt, the thing was rebuilt only 2 years ago too so whoever did that didn't do it prop :)

GFXMan, mate it doesnt make a noise anymore, it leaks and doesn't work under 2000rpm now LOL.

At the start it worked fine but it was just very noisy under load...very noisy.

Then it developed a leak and dumped all the fluid.

So basically the fixed the leak (in the high pressure hose), and put new fluid in.

I think the problem was (before the leak) was that the fluid was not gettting through properly.. not sure why.

Are you sure your steering rack is ok?

i have no idea about the steering rack but the fluid has stayed the same level since i got the car. no signs of leak? maybe a clog?

the thing is the power steering works for the first few minutes when i start the car then it stops but its not fully cut off. its just a bit harder to steer. heaps weird

i havent had the chance to bring it to the repairers yet but i have been to JADE or something on Port rd and they seem really dodgy. they kept my power steering pump for bout 6months just to test it. and i had to ring them up to hassle them to check it 4 me then they just said the pumped was stuffed and they had got rid of it.

yeah my hicas is stuffed as well

the power streering cuts out after the first minute or so then soon after the hicas light comes on

i didnt think it had anything to do with the power steering system? hicas problems is common with r32s but i wasnt fussed about getting it fixed but if its linked to the power steering then might as well get it fixed too

i was at a suspension place at Melrose park? next door to RPM and they gave me a number to this place that might be able to help.

havent tried them yet but if u want its

"Re-Car" 8263 9833

does anyone else have the same problem?

G'day mate,

I also have a 1JZ-GTE with power steering and oil leaks. Do you have any pictures of your engine bay or power steering setup?

I have a few small leaks in the hose i assume, but not sure if it is the rack. And recently I have lost half my engine oil due to a leak on the bottom end somewhere.

Have you had any major oil leaks. replaced valve stem seals, cam seals or anything thing else since you have had it? Have you had any problems with it since you have owned it?

Cheers.

Hey All,

I have an issue with my power steering..... basically it is f@ked! :D

Can anyone recommend someone that can fix these and wont rip you off?

I was thinking of maybe going a new one , but NFI where u would buy a brand new pump for an import?

Cheers :D

Rob.

G'day mate,

I also have a 1JZ-GTE with power steering and oil leaks.  Do you have any pictures of your engine bay or power steering setup?

I have a few small leaks in the hose i assume, but not sure if it is the rack.  And recently I have lost half my engine oil due to a leak on the bottom end somewhere.

Have you had any major oil leaks. replaced valve stem seals, cam seals or anything thing else since you have had it?  Have you had any problems with it since you have owned it?

Cheers.

Howdy Danish,

Umm I dont not have any close-up pic's of the pump or bay but I will try to get some up asap.

On the Powersteering note mine is again making noise under load... sometimes it is minimum , and sometimes it is loud.... so basically the pump is still shagged and is going to need preplacing to get rid of the noise .. or rebuild with a new seal/bearing kit... it works ok so I will live with it at the moment I guess.

As for engine leaks my car does not have any... the engine came from a half cut out of a JZA70-R and it looks like all the proper servicing was done whilst in Japan (including the proper 100,000km service ..eg timing belt).

Umm only things that were replaced by the previous owner (in Aus) was the harmonic balancer (nfi what it is LOL) and the waterpump.

The only real issues I know of is the turbo's on the 1JZ can be fragile when boosted to much... mine has not been boosted in Aus, and half cut never had any type of boost kit installed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
×
×
  • Create New...