Jump to content
SAU Community

Recommended Posts

Im sure you could source a good second hand one, or even better get it reco'ed. I think...is it DBA??/....that place that does brakes and clutches....i dunno Friday after work sucks :)...well yer, they had new parts for my car. Youd be suprised what you can get new for imports these days....their not so rare now, just make sure you ring around for a cheap price :P

Either that or Transteer...damn fine workshop :D

Dean it is the motor not the rack (thank god :D)

Joel enough out of u :(

Umm ok I will c about getting it rebuilt, the thing was rebuilt only 2 years ago too so whoever did that didn't do it prop :)

GFXMan, mate it doesnt make a noise anymore, it leaks and doesn't work under 2000rpm now LOL.

At the start it worked fine but it was just very noisy under load...very noisy.

Then it developed a leak and dumped all the fluid.

So basically the fixed the leak (in the high pressure hose), and put new fluid in.

I think the problem was (before the leak) was that the fluid was not gettting through properly.. not sure why.

Are you sure your steering rack is ok?

i have no idea about the steering rack but the fluid has stayed the same level since i got the car. no signs of leak? maybe a clog?

the thing is the power steering works for the first few minutes when i start the car then it stops but its not fully cut off. its just a bit harder to steer. heaps weird

i havent had the chance to bring it to the repairers yet but i have been to JADE or something on Port rd and they seem really dodgy. they kept my power steering pump for bout 6months just to test it. and i had to ring them up to hassle them to check it 4 me then they just said the pumped was stuffed and they had got rid of it.

yeah my hicas is stuffed as well

the power streering cuts out after the first minute or so then soon after the hicas light comes on

i didnt think it had anything to do with the power steering system? hicas problems is common with r32s but i wasnt fussed about getting it fixed but if its linked to the power steering then might as well get it fixed too

i was at a suspension place at Melrose park? next door to RPM and they gave me a number to this place that might be able to help.

havent tried them yet but if u want its

"Re-Car" 8263 9833

does anyone else have the same problem?

G'day mate,

I also have a 1JZ-GTE with power steering and oil leaks. Do you have any pictures of your engine bay or power steering setup?

I have a few small leaks in the hose i assume, but not sure if it is the rack. And recently I have lost half my engine oil due to a leak on the bottom end somewhere.

Have you had any major oil leaks. replaced valve stem seals, cam seals or anything thing else since you have had it? Have you had any problems with it since you have owned it?

Cheers.

Hey All,

I have an issue with my power steering..... basically it is f@ked! :D

Can anyone recommend someone that can fix these and wont rip you off?

I was thinking of maybe going a new one , but NFI where u would buy a brand new pump for an import?

Cheers :D

Rob.

G'day mate,

I also have a 1JZ-GTE with power steering and oil leaks.  Do you have any pictures of your engine bay or power steering setup?

I have a few small leaks in the hose i assume, but not sure if it is the rack.  And recently I have lost half my engine oil due to a leak on the bottom end somewhere.

Have you had any major oil leaks. replaced valve stem seals, cam seals or anything thing else since you have had it?  Have you had any problems with it since you have owned it?

Cheers.

Howdy Danish,

Umm I dont not have any close-up pic's of the pump or bay but I will try to get some up asap.

On the Powersteering note mine is again making noise under load... sometimes it is minimum , and sometimes it is loud.... so basically the pump is still shagged and is going to need preplacing to get rid of the noise .. or rebuild with a new seal/bearing kit... it works ok so I will live with it at the moment I guess.

As for engine leaks my car does not have any... the engine came from a half cut out of a JZA70-R and it looks like all the proper servicing was done whilst in Japan (including the proper 100,000km service ..eg timing belt).

Umm only things that were replaced by the previous owner (in Aus) was the harmonic balancer (nfi what it is LOL) and the waterpump.

The only real issues I know of is the turbo's on the 1JZ can be fragile when boosted to much... mine has not been boosted in Aus, and half cut never had any type of boost kit installed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few more recent pics
    • full send the cnut, do this   fark the wrapping and/or stick on siet. These guys are the ones to go to: https://www.realthermo.com.au/  
    • Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
    • From talking to the mx5 guys the NC doesn't actually need bonnet vents like the earlier NA and NB models, due to a better designed cooling system and undertray design There's plenty of them used as street cars and weekend track toys running anywhere from around 170 to 250kw with stock non vented bonnets, I initially was going to get some bonnet vents, but, as they are not actually required, I'll put vents on hold for a while and just monitor temps, though I do need to get something to actually monitor engine oil temps though, coolant temp can be pulled from the OBD2, but the oil gauge in the car is not actual oil temp, it is only a calculation based off coolant temp and RPM ☹️ They do recommend upgrading the radiator, which I have already done with a triple pass, and the only other thing they recommend for a street car is heat management, like I talked about above to protect bits in the engine bay from radiant heat, and to either replace the nearly 20 year old plastic coolant expansion tank, which I have done, or get a aftermarket alloy jobbie for some bling They did also say that if I wanted to track the car on occasion a oil cooler and sump baffle would be required, and as I already have had a sump baffle installed when the engine was out......... I'm going to get a oil cooler with a thermostat....... just in case I do eventually track the car, but probably not, but still maybe...🤪
×
×
  • Create New...