Jump to content
SAU Community

Recommended Posts

Does anyone here have any picture examples of locations on the firewall they've run a circular bulkhead connector like the Corsair/Amphenol units commonly referred to as "milspec", or Deutsch AS connectors? After looking around a few times, it seems like all of the good space is right behind the ABS module, but with no room to connect and disconnect them as it's pretty tight? Anyone have any other ideas on a car that will retain AC and heat?

 

I’ve only just got my 2 connectors (47 pin deutsch) so haven’t done it yet but my plan is to replace the factory grommet with one and putting another one just below the brake booster on the drivers side.  I’m running drive by wire so will need extra wiring in that area so makes sense to relocate some of the wiring across that side at the same time.  My aim is to have no wiring across the back of the firewall at all (would like to take coil wiring across to drivers side loom as well) but we’ll see what happens….

which car, your profile and post don't state?

I've added a grommet and wiring through for brake pressure sensor next to the ABS which is a similar size to most of those circular connectors in my 32 gtr

I'm on mobile now, so I can't see my profile. I thought I had it on there, but if I don't it's an ENR34.

 

Looking to run 3 circular connectors. I was thinking someone may have utilized some space on the lower portion of the firewall that's not incredibly obvious from above.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...