g35-900 vs g35-1050 vs 6466

[Dose Pipe Sutututu]

2 minutes ago, hattori hanzo said:

anyone stretched the legs of a G35 900 yet?  

I would be interested in this too, especially with the T4 1.06 divided rear housing

[mr_rbman]

The only one I know of on a 2.6 is a G35-900 (0.83 rear) making 528rwkws @ 35psi.

 

[hattori hanzo]

On 20/04/2023 at 2:33 PM, mr_rbman said:

The only one I know of on a 2.6 is a G35-900 (0.83 rear) making 528rwkws @ 35psi.

 

any dyno sheets or similar?  

[burn4005]

On 4/20/2023 at 2:33 PM, mr_rbman said:

The only one I know of on a 2.6 is a G35-900 (0.83 rear) making 528rwkws @ 35psi.

 

interesting. at that boost (3.4 comp ratio) you're overspeeding it at 145krpm @ 75lb/min which that certainly would be.

My EFR8374 makes 500rwkw on a 2.6 with the 1.05 rear and it is all in at 128krpm at 580g/s (77lb/min)

[hattori hanzo]

1.15 T4 divided 6466 Gen 2 

vs 

G35 900 1.06 T4 Divided (6262 equivalent) 

 

THE SAME  it builds identically and ends up =/- 2% max power 

We did play around with cam timing to bring it on earlier after this dyno graph and

street logs have it around 1 bar at 3750 or so on the street in 4th gear vs 4200 for the 6466 but doesn't show any benefit on the dyno run. 

a cheeky little launch said it comes on earlier also 

Haven't tracked it yet, but am keen to do a rally sprint and see how it goes 

 

 

 

 

 

[Dose Pipe Sutututu]

@hattori hanzo horny look results, can't recall, is your motor a 2.6 or 2.8 or > 2.8?

[hattori hanzo]

13 hours ago, Dose Pipe Sutututu said:

@hattori hanzo horny look results, can't recall, is your motor a 2.6 or 2.8 or > 2.8?

2.8 mate 

still same old HKS Step 2 

[Dose Pipe Sutututu]

Sensational results, makes me want to swap out my dated GTX3576R Gen 2 for a G35-900.

Probably end up spoiling 500 to 700rpm earlier and make much more power and then break other things.

[bcozican]

Shows how much better that are when you let them breathe. Good results 

[hattori hanzo]

On 07/10/2023 at 4:54 PM, bcozican said:

Shows how much better that are when you let them breathe. Good results 

The amount of people that don’t maximise turbos and change them out

 

I think rob is one of the best for extracting as much as is practical from a turbo

[Mets]

My G35-900 1.06 T4 result on HKS 2.8 stroker 

https://ibb.co/VD2qT1r
https://ibb.co/NSgqK76