Jump to content
SAU Community

got done :(

coco69

By coco69,
in Victoria

 Share

Recommended Posts

OKBANANA Grand Master

OKBANANA

Posted
Posted
oh its got an rb26, haha then your screwed, way over

206 / 1.32 = 156.06

Yeah but if it's a R32 GTS-t with a RB26DETT conversion it should be right as it goes on the factory power to weight.

Link to comment
Share on other sites
coco69 Experienced

coco69

Posted
  • Author
Posted

oops, forgot to state guys, i'm running a jzgte tt in what once was an NA supra. :D

sorry about the confusion.... still got love for me? my r32 is still at home! :(

but yeh, need help with the engineers cert. thanks for all the replies guys!

Link to comment
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

yeah technically an r32 gtst with an rb20det is fine, but if they go off the factory spec of the engine he has, which i would say they are, then its 206kw (even tho we believe its more) and not 154kw which is way over

Link to comment
Share on other sites
Guest RedLineGTR

Guest RedLineGTR

Posted
Posted
oops, forgot to state guys, i'm running a jzgte tt in what once was an NA supra. :(

 

sorry about the confusion.... still got love for me? my r32 is still at home! :)

 

but yeh, need help with the engineers cert. thanks for all the replies guys!

no love for coco :D

aaahh j/k

Link to comment
Share on other sites
BenA31 Experienced

BenA31

Posted
Posted

Was it officer Pettette? from Knox TMU?

if so, that sucks dude, everyone epec P plates have gotta stay away from that area. its defect and power to weight central! Cops are actually targeting certain people from the forums aswel who are bitchin bout him. have a look in nissansilvia.com.........and by this i mean contacting the site owners to hand over certain peoples IP address's and finding out who they are.

Link to comment
Share on other sites
Interloper Veteran

Interloper

Posted
Posted
oops, forgot to state guys, i'm running a jzgte tt in what once was an NA supra. :D

 

sorry about the confusion.... still got love for me? my r32 is still at home! :(

 

but yeh, need help with the engineers cert. thanks for all the replies guys!

EDIT: whoops, didn't realise u were driving a supra :Oops:

Link to comment
Share on other sites
predator Grand Master

predator

Posted
Posted
Cops are actually targeting certain people from the forums aswel who are bitchin bout him. have a look in nissansilvia.com.........

just kill the cvnt.. or find out where he lives, then he will know PAIN ..

in.. person did that successfully with another officer once.. lol

Link to comment
Share on other sites
coco69 Experienced

coco69

Posted
  • Author
Posted

lol yeh... dun worri i still got my r32 :(

but its kinda hard to stay away from the knox area when i live 5min walking distance from both knox police station and knox city. :D i drive out of my road and im like a street or two away from knox...

hehehehe... the supra is sick :)

Link to comment
Share on other sites
BenA31 Experienced

BenA31

Posted
Posted

btw pettette also is always in that same silver unmarked ba falcon.

last time i called up VicRoads they were able to forward me on to a few engineers. maybe give them a call, otherwise, if ya still stuck coco, i know one of my mates knows a cheapish engineer in the area. cost him like 100 for his first visit, told him to fix a few things and then he would come back. i'll find out if ya still stuck.....just let me know.

Link to comment
Share on other sites
coco69 Experienced

coco69

Posted
  • Author
Posted
they are on the vic roads website.

stop asking people to find it, and have a look yourself :)

thanks for that man... i've already done that, but was more looking for peoples experiences or places that they can recommend. they get kind of costly when u go through vicroad's list, and seeing as most of the people on this board are car enthusiasts i figured that some people might have first-hand experience and be able to recommend and help another fellow enthusiast.

when you're looknig to get work done on your car i dont think u open the yellow pages and look for "IMPORT WORKSHOP", do you? same principle. you talk to people who have been in similar situations, find out which workshops are good, who charges good rates, has good service, etc... my thought on the objectives of a forum and club was that it was a place to share information with one fellow enthusiasts. sorry if i'm mistaken and sorry for asking people for their advice.

not offended, but i always get such replies.

and rob, shhh, i swear its the lighting. you still workin at chaddy? i'm there often and see you busily behind the counter with your apron on... lol, look who's the metro! :rofl: anywayz, if you still work there, i'll swing by sometime and organise picking up my dvd off ya.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Count Grantleyish
      Vic Wasteland Thread - 15.0

      By Count Grantleyish · Posted

      People still have Skylines? I thought they're non-existent now. 
    • pogman
      George's R33 GTST build

      By pogman · Posted

      Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • GTSBoy
      Hello Everyone

      By GTSBoy · Posted

      They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • Triple OG
      Hello Everyone

      By Triple OG · Posted

      I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • r32-25t
      GReddy Injector Help!

      By r32-25t · Posted

      Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...