Jump to content
SAU Community

Car Resprayed for the second time now it has burns


Recommended Posts

I got the car back towards the end of last week from its second respray.

The first time it had massive orange peel throughout and paint runs every where.

The last couple of days last week were rainy so I wasn't able to full inspect the car. Initial inspection looked good, bugger all orange peel, nice and shinny.

BUT... As soon as the sun came out yesterday and today horrible white marks have appeared.

To myself (who doesn't know a great deal about paint) it looks like they have burnt the paint when buffing.

The car is going in Monday to get the front bumper buffed up as they left it dull and white looking. So I'll discuss the paint burns with them then.

Can some one confirm they are paint burns?

How is this fixed?

Can it simply be buffed out or will it require another damn respray :rofl:

NOT HAPPY JAN!

Here's the previous threads with original peely pics.

1st - http://www.skylinesaustralia.com/forums/sh...ead.php?t=44166

2nd - http://www.skylinesaustralia.com/forums/sh...ead.php?t=45846

Link to comment
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

They have three options:

- Give you a full refund so you can get the work carried out somewhere else

- Pay someone else to do the job again, professionally.

- Have another go ..

If they refuse get a lawyer to write them a scary letter.

Link to comment
Share on other sites

Not sure, I am no expert when it comes to paint.

Just go back and bitch at them and see what they come back with. I remember the first time it happened thinking that you did pay top money for a top job, and that is not what they have given you on two ocassions.

I cant believe they even let you have the car back without it looking immaculate.

Link to comment
Share on other sites

Its ridiculous. I've really had enough.

Problem is I haven't got the $$ to take them to court being a poor uni student only just being able to afford the car. oh and a few mods :rofl:

Link to comment
Share on other sites

it looks like those "paint burns" are just buff marks, and they should polish off, but those runs are pathetic and they've just smashed the paint on as if they didn't care about ur car, u should definately tell them to fix it up, because u proly won't get ur money back, even if u do it will take ages

Link to comment
Share on other sites

He shouldnt have to mate. If its been F*Kd twice, would you go and spend a few hours fixin someone elses shit?

No....well he knows where its headed anyways. If its burnt the paint, then yes - it will need to be resprayed. If it hasnt, well a good buff should bring it out. Either way the insurance company should find out, with minimal hassles to Joel to get it fixed...

Link to comment
Share on other sites

Take it to another shop and get some advice on what the marks are. Someone in the trade would be able to diagnose that soon as look at it. The tiger pattern one looks like bodgy buff work, cloudy paint can be a result of painting in the wrong conditions, whens it raining for example.

Far as what you can do try an do it legally and sensibly if you can, i know id find it hard.

recently in my area i know of a spray painter who was hospitalised for doing a bodgy job!

Link to comment
Share on other sites

Take it to another shop and get some advice on what the marks are. Someone in the trade would be able to diagnose that soon as look at it. The tiger pattern one looks like bodgy buff work, cloudy paint can be a result of painting in the wrong conditions, whens it raining for example.

Far as what you can do try an do it legally and sensibly if you can, i know id find it hard.

recently in my area i know of a spray painter who was hospitalised for doing a bodgy job!

Damn Joel, you're not havin much luck with this... I agree with Timd, take it to another pro, and see what they say.

She'll be right! But going from the pics, it does look like a good poilsh and buff will fix.

Link to comment
Share on other sites

Guest RedLineGTR

But seriously try to buff it out and see what happens, but honestly when i had some paint work done a little while ago and if i got something like you had got on your second time i wouldnt of even taken my car home!! which at one time i came back three times to the same paint place cos each time they didnt finish off things that i noticed..this was a insurance job and the insurance paid for my taxi everytime i went there.

Link to comment
Share on other sites

Its going back in Tomorrow morning so we shall see. :(

Be sure to PM me if you are keen to know who it is.

A small percentage of the job is an insurance job the rest is private.

The problem you don't really notice half the issues with paint until you wash it your self. :D

Link to comment
Share on other sites

Guest RedLineGTR

From what i can see from the pictures, and from personal experience with detailing some cars, it will buff off!! but to be 100% there is nothing like seeing it in the flesh (impossible) which i could say 100%. Just grab some meguires polish when you get a chance and see how you go. My 2 Cents.

Rob

Link to comment
Share on other sites

recently in my area i know of a spray painter who was hospitalised for doing a bodgy job!

isn't it sad that in this day and age you have to go to these lengths to get what you paid for. im sick and f'ing tired of seeing dodgy work.

my advice is to not tough it at all incase it does need a respray. if you tamper with it you won't have a leg to stand on. firstly, take it back and see what happens. if it gets nasty, lawer time. It shouldnt cost anymore than $50 to get a solicitor to listen to your story and write a letter to them explaining their options those now being limited. you need to do something about it asap too, the longer you wait, the harder it will be to get them to do thier job properly.

also, it looks like the apprentice who painted your car the first time around was made to buff your car the second time around and look, he's f**ked it up again.

-rb25

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...