Jump to content
SAU Community

Not sure if i can turbo my rb30 motor HELP

JohnnyR31Silo

By JohnnyR31Silo,
in Introduce yourself

 Share

Recommended Posts

JohnnyR31Silo Enthusiast

JohnnyR31Silo

Posted
Posted

Hi I bought a Nissan Skyline R31 Silo.

Basically I had to swap my motor because it was buggered, ended up buying another rb30 motor which came out of a wrecked VL wagon from Sydney. 

The thing is I am not sure if I can turbo it.. I am not to familiar with A8 blocks and what not.. would not know the difference so if anyone could help me find out if I can turbo it please let me know ill send some photos through, of what I think is the hole for the oil feed 

Any tips in general especially when it comes to what type of turbo and what not to get would be greatly appreciated   

 

Link to comment
Share on other sites
  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Shoota_77
Shoota_77

It's like catching a 50 pound Murray cod on 10 pound line, the thrill of holding it all together is all part of the enjoyment of the sport! 🤣

GTSBoy
GTSBoy

Yeah there's no point in choosing things on that list like an old stock ECU, the VL injectors, etc etc, just because they are second hand and therefore "cheaper" than a new alternative. You'd be insan

Shoota_77
Shoota_77

Yes mate, Headspec in Clayton.

Posted Images

Shoota_77 Veteran

Shoota_77

Posted
Posted

You can run an oil feed from the cold side to feed the turbo. Normally -4 (4an) braided hose is the go. If you haven't got a spare 1/8" npt port on the oil filter housing you can buy adapters that give you extra ports.

Something like this-

Screenshot_20220203-180442_Chrome.thumb.jpg.226277ae0ac3b93883aa8c2e6eacd9fb.jpg

 

If there is no oil drain in the side of the block you'll need to weld an AN fitting onto your sump to return from the turbo into. Something like this-

Screenshot_20220203-180727_Google.thumb.jpg.3280c35d2ebc947620d89d9024343409.jpg

  • Thanks 1
Link to comment
Share on other sites
JohnnyR31Silo Enthusiast

JohnnyR31Silo

Posted
  • Author
Posted

Then whats the whole big deal about A8 or whatever its called ? 

i can see now that it can be done maybe they just say that because theres more f**k around to it ? 

as well i was told if its not an A8 that it wont be able to have as much boost is this true? 

im gonna get some photos of my motor in a few minutees just waiting for my phone to turn on 

Link to comment
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

What difference do you think the block makes?

There is clearly a plug in there you pull out for the oil return. So that's handy . Oil feed is super easy to sort out as per above post.

 

Are you going to turbo a 30yr old wrecker engine? Sounds fun.

  • Sad 1
Link to comment
Share on other sites
JohnnyR31Silo Enthusiast

JohnnyR31Silo

Posted
  • Author
Posted

yeah well i plan on thrashing it a bit first then getting it rebuilt then chucking in a turbo.. but i want to make sure i have the right motor for it 

Im obviously new to cars im asking for questions i know im a noob no need to bust my balls some advice would be greatly appreciated.. so if this motor is fine for me to turbo like you have said since it has a plug.. then sweet unless use have some advice for me that would be apprecaited as well man.. i just want some advice im new to cars 

Link to comment
Share on other sites
JohnnyR31Silo Enthusiast

JohnnyR31Silo

Posted
  • Author
Posted

in genreal any bit of advice i would appreciate im new to cars.. 

for thr 1st question does anyone know if its an A8 ?

i know im a noob lol sorry to bust balls just a lot to take in 

cheers 

Link to comment
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

You've mentioned A8 a couple of times, what is that about?

You can certainly turbo your engine, you just need to understand the turbo oil and water plumbing, intake and exhaust to suit, ECU, injectors etc. 

Depending on the block it can be harder to do a twin cam conversion because some blocks don't have the machined flat surface for the second tensioner required for that, but it doesn't sound like you were thinking about going that way

Link to comment
Share on other sites
Shoota_77 Veteran

Shoota_77

Posted
Posted
On 03/02/2022 at 9:58 PM, GTSBoy said:

And if you turbo an RB30 in front of an old RB30 NA manual gearbox.....the gearbox will not last long. Even at lowish boost. Too much torque for the poor little thing.

It's like catching a 50 pound Murray cod on 10 pound line, the thrill of holding it all together is all part of the enjoyment of the sport! 🤣

  • Like 1
  • Haha 2
Link to comment
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted
On 2/3/2022 at 8:04 PM, JohnnyR31Silo said:

in genreal any bit of advice i would appreciate im new to cars.. 

for thr 1st question does anyone know if its an A8 ?

i know im a noob lol sorry to bust balls just a lot to take in 

cheers 

Definitely not an a8 

They were vl turbo only.

Doesn't matter.

Link to comment
Share on other sites
Shoota_77 Veteran

Shoota_77

Posted
Posted

So judging by the photos you've got the turbo oil drain point (so don't need extra fitting on the sump apart from if you run a head drain/catch can drain (would recommend both), run your 4an oil feed from oil filter housing, coolant feed is probably there too but need to see more photos of the hot side of the block under the exhaust manifold to confirm.

The trickiest part is the provision for the additional timing belt tensioner probably not being there and potentially being the non machined version (there seems to be a few variations in this area).  Mine was a rough cast block so when I was gettig my block prepped I got my machinist to machine down an area about the size of a 50c coin and then made a spacer the same size to bring the level up to flush with the other mating surfaces on the face of the block.  A bit hard to explain without photos...

Either way, ANY RB30 is useable with a little more or a little less work required depending on the block.

  • Thanks 1
Link to comment
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted
On 2/4/2022 at 8:12 AM, Shoota_77 said:

So judging by the photos you've got the turbo oil drain point (so don't need extra fitting on the sump apart from if you run a head drain/catch can drain (would recommend both), run your 4an oil feed from oil filter housing, coolant feed is probably there too but need to see more photos of the hot side of the block under the exhaust manifold to confirm.

The trickiest part is the provision for the additional timing belt tensioner probably not being there and potentially being the non machined version (there seems to be a few variations in this area).  Mine was a rough cast block so when I was gettig my block prepped I got my machinist to machine down an area about the size of a 50c coin and then made a spacer the same size to bring the level up to flush with the other mating surfaces on the face of the block.  A bit hard to explain without photos...

Either way, ANY RB30 is useable with a little more or a little less work required depending on the block.

As he isn't putting a 25 or 26 head on, so tensioner area is not a  concern in this case.

 

Should really do an LS swap instead!

 

  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Thanks for the reply, So i've continued playing around, and fitted the injector adaptors onto the injector, the fuel rail is not able to be mounted now as the injectors sit a bit further out. I suppose the point of the adaptors is so that the injector nozzle isn't so deep into the intake? I suppose 1mm extra on the o-ring would do it but still can't mount the rail onto the intake haha. Waiting on a reply from Aeroflow I'm sure there's something stupid that I'm missing...
    • defari
      Spotted - QLD Skyline Owners

      By defari · Posted

      EMJ33 or EJM33 - west end
    • TurboTapin
      GReddy Injector Help!

      By TurboTapin · Posted

      I have a radium fuel rail on my Greddy manifold and used the supplied radium fuel injector to manifold adapters (The round green things pictured). I did always wonder if you could just go ahead and use the second lower hole like you're doing... Wouldn't thicker o-rings solve your issue?    
    • MBS206
      Does anybody use the Firestryker or Element sticks?

      By MBS206 · Posted

      From what I've seen and experienced first hand with those powder extinguishers, they're good to use to break a window and escape the car, and half the time then do f**k all to stop a fire. You just need much more than 1KG worth of powder. Not to mention, half the time it's an engine bay fire, and you can't easily, and do not want to completely open the bonnet, so you're left pretending to be an American Infantry... Spray and Pray baby!   And then 100% that shit is really destructive afterwards!   Realistically, those little ones at a race track might help you keep the fire from growing and give the fire marshal / truck a chance to actually get to you with their multiple large bottles.   For a road car, these days, prepare to deboard as quickly as humanly possible, and move to safety. Allow insurance to fix replace it (unless it's like a rare classic etc, then do nearly everything possible to save it!) Keep the little extinguisher with you to help protect other things around you from burning while you stand there singing "How can we sleep while our beds are burning?"   Secondly, powder extinguishers I freaking hate for indoor use, (this isn't really relevant to a car) as you will get a powder fog around you, and it can be disorientating.   When I did fire training when at BlueScope Steel, they have (had?) their own fire brigade on site. We did all the training, and at the end we were told, "If it's an indoor fire, and you need to use a powder extinguisher, we as the fire brigade would rather you just exit the building, you're more likely to get lost in the smoke and powder fog than do much help, so just GTFO" And pretty much that was what they said for most other fires too, grab extinguisher, if it's much more than paper in a bin fire, use extinguisher to get you and others out of the building to safety...   Part of me wishes when my Skyline caught alight many moons ago, I let insurance sort it out, instead of putting the fire out... part of me now says "But I've saved a classic before it was a classic!"
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Hi all,  I have a older model of the Greddy Front facing intake on an RB25DET NEO Head. I've bought aeroflows fuel rail and injector kit (1000cc Bosche injectors) and I'm unsure if the fitment is correct. The injector o-rings fit in the intake hole but it's not snug. I can very easily rotate the injectors even when the fuel rail is mounted. The kit also came with multiple adaptors, they dont make it any more snug and using them raises the injectors up and i cant mount the fuel rail. I hope this makes sense I've asses a few photos.    Thanks so much guys. 
×
×
  • Create New...