Jump to content
SAU Community

R32 Air ducts required

John Murray
 Share

Recommended Posts

BK Grand Master

BK

Posted
Posted
On 17/03/2022 at 8:55 PM, John Murray said:

I'm looking for the first two air ducts behind the bumper bar that lead to the air filter duct. See drawing attached. Any assistance appreciated.

Thanks2062561166_Airducts.thumb.png.4833599c2da4bd60dc8774643cffcbb2.png

I do, I have the big piece. I might have the small coupling section too but it wasn't with it and could be anywhere at my Dad's black hole of a work area.

 

20220318_163703.jpg

20220318_163709.jpg

20220318_163725.jpg

20220318_163717.jpg

John Murray Enthusiast

John Murray

Posted
  • Author
Posted

Hi Ben

Thanks for the great reply and trouble taken with the photos.

I  got the first piece OK, now after the joiner section. It is the last piece to get the car to 100% original, even down to the air con. sticker. 

The car is #56 of the original 70 BRN32A domestic models. That's us climbing out of Cooktown, Tassie. in the rain of course.

Please let me know if you find the joiner piece as they are not available from Kudos in Brisbane.

9TT 8573.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PotatoCake
      Exhaust silencers/varex exhausts

      By PotatoCake · Posted

      I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • The Bogan
      NC MX5

      By The Bogan · Posted

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Murray_Calavera
      Exhaust silencers/varex exhausts

      By Murray_Calavera · Posted

      Nice, let me know how you find the 98 tune
×
×
  • Create New...