Jump to content
SAU Community

Recommended Posts

On 5/22/2022 at 7:32 PM, Murray_Calavera said:

Cheapest way? Spray.

A wet kit with 200hp jets could be up and running for less then $2000. Then its about $16 per pound when its time to refill your bottle. 

 

Ok sorry I should rephase my question. But good answer haha. 

How can I make 400whp that isn't using nitrous. 

Whats your budget? Maybe call Nispro in QLD for quote - they build a lot of VQ and have a turbo kit in development - but id say at least 20k to do it right - oh actually maybe do LS swap will be cheaper but....hmm  im a purist - so id rather stick to VQ35DE or whats the point lol.... just my opinion - do what u want. its your car

 

Edited by SuperDry2013

a blower on 6-8psi on ethanol is the easiest way. Anything more is rods and pistons.
Contact East Coast Customs as they are all over above combo
https://www.eccustoms.com/
https://www.facebook.com/eccustoms/

Did heaps when I was there with good results, factor in headers, a clutch and oil cooler too.

  • Like 1
On 5/22/2022 at 8:03 PM, Blakeo said:

Hi guys, 

As the title states what is the most cost effective way to make 400whp from a vq35de in a V35 skyline chassis. I'm looking at all available options even an engine swap, price is a major factor. 

Cheers.

 

On 5/23/2022 at 11:48 AM, robbo_rb180 said:

a blower on 6-8psi on ethanol is the easiest way. Anything more is rods and pistons.
Contact East Coast Customs as they are all over above combo
https://www.eccustoms.com/
https://www.facebook.com/eccustoms/

Did heaps when I was there with good results, factor in headers, a clutch and oil cooler too.

@Blakeo the first link by @robbo_rb180 above takes you to their site, and they have a "chat" feature. Sounds like the perfect people to ask. I was a little disheartened that their Nissan page was a little sparse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Not that I know from experience, but in theory you'd want your gate spring to be as close to target pressure as possible, so you'd go with the higher gate spring?
    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
×
×
  • Create New...