Will this work?

[PerthR33GTST]

So I have rolling shell s1 r33 that is stripped except hood and fenders and here is what I want to do.

Genuine nismo heritage r33 GTR front bar (Use heatgun to make fit with fenders)

GTR Front Grille. (Real GTR not GTR "Style"

 

Will this work and look nice with GTST Hood and fenders? I just like the GTR front better than GTST but I won't put gtr logo on since it is not a gtr.

[Duncan]

I'm sure there is some older threads about this, but I expect that the guards and indicators are wider on GTR than GTST, so it won't match up. If I remember correctly there were aftermarket "GTR style" front bars made for GTST which would be a better way to go, or change the guards/indicators as well if you can get them

[PerthR33GTST]

I only want genuine GTR parts for the front so would using a heat gun and bending the bumper make it fit to the fenders? and if the gtr is just longer (Apart from fenders) would I be able to fit a GTR grille.

[UWISSH!]

This is stupid

either do the whole lot- guards, gaurd raisers, bonnet, grill and front bar or don’t do it at all.

the gtst is narrower than a gtr. If u heat bend the gtr bar around it’s going to end up going past the wheel arch line and your either going to have to trim it back or leave it with a stupid step between the wheel arch and front bumper

i don’t even remember the grill being a direct swap over.

you are honestly better off buying a gtr style bar made to fit a gtst from a reputable business. 
you are going to butcher a perfectly good expensive front bumper 

[PerthR33GTST]

Alright. Thanks for the input. I will just do the GTR-Style bumper plus gtr grille

[PerthR33GTST]

This guy has GTR grille on so will probs do that. 

[UWISSH!]

Doubt it’s genuine. From memory the genuine grill has guide/ tabs that help it line up with the front bar on the underside of it

[UWISSH!]

100% not genuine.

it’s missing the centre piece that holds the gtr logo on

[PerthR33GTST]

Alright I guess I will go the non-genuine route (I did not want to originally but seems easiest and cheapest). Could you recommend any companies that do a GTR grille and bumper that actually look good