Jump to content
SAU Community

Recommended Posts

I find that the 370CCA NRMA 2383 batteries don't seem to last very long considering that most of the time the battery is isolated as the car only gets intermittent use. Any suggestions? Is there a good lithium option? Am I just imagining the short life or is 370CCA a bit small?

Link to comment
https://www.sau.com.au/forums/topic/483707-r32-gtr-battery-options/
Share on other sites

I suggest the biggest Century battery that fits in the space. I can't remember exactly which one I put in there. I think it's the 430CCA one. I find Century more trustworthy than most other options available in Australia.

I also suggest that you either leave a solar panel charger on it, or a good float charger, if it is really left idle most of the time.

That might be the NS40ZX (410 CCA) which is not listed on Century's website any more. I've sent them a message to ask if its been discontinued. https://www.centurybatteries.com.au/products/car-batteries

The NS40Z is the 330CCA version, which is 'D' polarity (ie positive on the left, and you install it 'backwards') and small post. They still have the NS40ZLX MF ('C' polarity version @ 410 CCA).

There are a few web listings of the NS40ZX around so i'll see if i can find one.

Ended up getting a NS40ZLX after confirming the cables just reach by using an old NS40ZL from the Stagea. The bonnet is still well clear of the positive terminal, so only slightly ghetto.

Do what Gtsboy suggested though...keep the battery on a trickle charge.  I use an Oddyssey PC925MJT in my R33 and it also [these days] gets intermittent use.  But - so far - my battery has lasted 5 years cos its always hooked up to a solar panel and PR1210L regulator.  I also wired in a blocking diode to stop night time discharge.  I have a plug I use under the car and so every time I park it, I plug the solar lead into the car.  The panel doesn't have to be a big one, a 5 to 10 watt unit will easily do the job.  I use the same type of setup on my bikes, my excavator, and my mini dumper.  The dumper has a Lister 2 cylinder diesel motor which has no alternator or generator so the solar setup was almost essential.

Before I did this, I was going through batteries every 12 to 18 months.

I have a battery isolator as well, but a battery just sitting there slowly fades away, esp. in the cooler months.

What happens is the battery plates calcify, this then stops the chemical reaction needed for effective charging and recharging.

By trickle charging you stop plate calcification.

  • Like 1

I would recommend Panasonic OEM style batteries for any Nissan. Decent prices and three year warranty for private use.

Something like this would fit a R32 and provide decent CCA, the R version should be right polarity too: https://www.everybattery.com.au/online/product/n-60b24rje/

Edited by junkie
Spelling fail
  • Like 1
On 04/06/2022 at 8:21 AM, blind_elk said:

Autobarn has a Supercharge brand, which has a NS40 equiv (MF40B20L), at 390 CCA.

Two things:

1. I have had two Supercharge batteries in the GT-R and they have not lasted very long

2. Is there a rule of thumb regarding how long a battery should be on a trickle charger? Maybe, possibly related to point #1.

On 6/4/2022 at 9:39 PM, Robzilla32 said:

2. Is there a rule of thumb regarding how long a battery should be on a trickle charger? Maybe, possibly related to point #1.

I've bought a ctek mxs 5.0 (mentioned by BK above, $129 delivered from ebay) and the instruction video says you can leave it connected for extended periods of time. So, refer to vendor doco, but as trident says seems like any good one should be able to be left connected indefinitely.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, while being... strictly unnecessary. Tuning is a bit like quantum physics. You don't need to understand what Schroedinger's equation actually means. You just need to run the computation and accept the answers. With tuning, you just push page up/down until the exhaust tells you that you've got the fuel right. The VE can stay hidden behind the curtain like the Wizard of Oz and you'll never need to know what he looked like.
    • The second part yes, the first part about easy VE calculation is something I've seen a few people talk about online.
    • You 100% could do that, would save money on a gym membership lol. But yeah, getting a cordless orbital sander will feel priceless coming from doing it manually.  Good luck with it mate
    • I initially was going to do the whole car with a block then realised, it would be a bigger monster of the job 😂 I guess that's all part of the learning process. I appreciate all that advice, I think I got a good idea on how to tackle this whole job.
    • I admire your efforts with the scuff pad.  As a mere mortal, I use this for the baulk of my sanding work- https://sydneytools.com.au/product/milwaukee-m18bos125-0-18v-li-ion-cordless-125mm-5-random-orbital-sander-skin-only Yes you can easily create a low spot while sanding. There are 2 types of filler, 1 part of 2 part. The 2 part filler will get used for large corrections and the 1 part filler will get used for pin holes and areas that only need slight filling.  Depending on how zealous you are with the sander (very easy to do with a power tool) or if you are chasing rust etc, yes those low spots will need to get filled or you will end up with a very obvious defects in the paint.  Using the guide coat and large sanding block, high and low areas will be revealed (watch youtube videos for a good visual on this). Its up to you if you think its worth the effort to make the car completely flat before you spray it (you make it flat by filling the low areas).  At the end of the day, it comes down to time. The end result comes from the level of prep put in to the car. If you want a perfect result, you have to put in the time during the prep stage or else it will be impossible to achieve a perfect result during the spraying process. 
×
×
  • Create New...