R33 power locks and windows stopped working

[dee242]

2 dr gtst 98 both doors locks and windows stopped working 

I can manually power up windows

i have already checked the fuses wiring and relays what else am I missing 

[GTSBoy]

On 6/25/2022 at 11:39 PM, dee242 said:

i have already checked the fuses wiring and relays

I'm wiling to bet that this is not sufficiently true, otherwise you'd likely have found the problem, or at least narrowed it down.

So, when you say you've checked, what does that mean?

And, if there is power and earth where there is supposed to be at the door switches and control  modules, then......likely that the problem is inside a door control module. They do die. They have electronics inside them that don't last forever.

[dee242]

Where is door controlle module https://www.dropbox.com/s/f3m8db0wausmjrn/R33 Wiring Diagram.pdf?dl=0

[GTSBoy]

In the door.....

[dee242]

On 26/6/2022 at 5:30 PM, GTSBoy said:

In the door.....

There is no module in my drivers door there’s just door lock actuator and switch 

[GTSBoy]

What's under the armrest on the back side of the door trim?

[dee242]

There’s nothing there

[Duncan]

p15 of the link you posted says the door control module is B-77

p11 shows B-77 is connector 38, which is to the left of the fuse box under the driver's side dash

[dee242]

On 13/7/2022 at 2:36 AM, Duncan said:

p15 of the link you posted says the door control module is B-77

p11 shows B-77 is connector 38, which is to the left of the fuse box under the driver's side dash

[dee242]

Update replaced that door lock control module still no powe windows or power locks  

[dee242]

I’m getting one volt to drivers door harness didn’t see any breaks in door joint fuse is not blown because electric mirrors n speakers still work replaced the door lock module no change only other thing I can think of is rcl module

[dee242]

Bump

[dee242]

Turned out to be corroded buss bar on front fuse box for any one that stumbles across This