Jump to content
SAU Community

Recommended Posts

49 minutes ago, sonicii said:

Yep, about the best you could expect from an ECU tune with no supporting mods would be about 10-15KW.

Anything that plugs into the OBD2 port and claims power/economy gains will be a scam ,just don't go there!

At the flywheel, it is quite a bit less at the wheels where a dyno measures power. From what I have read a stock 370Z is around 200kw at the wheels, so the 370GT would be similar.

depending on km & condition they would make at the wheels
Manual 195-205kw
Auto 190-195kw

bro's bro's bro's. The V series skylines are from like 2003, to like 2012. During this period Japan im[posed speed and kilowatt speed restrictions on their car's. Car's produced at this time can easily be tricked to get Way better performance by simple mods once the cars is shipped internationally. No one has these car's which this forum say's and all yall own skylines from the 90's. What's wrong with you's?!

On 9/18/2022 at 10:18 PM, Aramith said:

bro's bro's bro's. The V series skylines are from like 2003, to like 2012. During this period Japan im[posed speed and kilowatt speed restrictions on their car's. Car's produced at this time can easily be tricked to get Way better performance by simple mods once the cars is shipped internationally. No one has these car's which this forum say's and all yall own skylines from the 90's. What's wrong with you's?!

lol

1 hour ago, Aramith said:

bro's bro's bro's. The V series skylines are from like 2003, to like 2012. During this period Japan im[posed speed and kilowatt speed restrictions on their car's. Car's produced at this time can easily be tricked to get Way better performance by simple mods once the cars is shipped internationally. No one has these car's which this forum say's and all yall own skylines from the 90's. What's wrong with you's?!

Wow, just wow 🤦

12 hours ago, sonicii said:

Yep, about the best you could expect from an ECU tune with no supporting mods would be about 10-15KW.

Anything that plugs into the OBD2 port and claims power/economy gains will be a scam ,just don't go there!

At the flywheel, it is quite a bit less at the wheels where a dyno measures power. From what I have read a stock 370Z is around 200kw at the wheels, so the 370GT would be similar.

I just go off all the internet sites I see. Google search quick answers, Wikipedia, specific tuner sites all say the car is 244-245KW’s and it doesn’t say at the fly wheel or the rear wheels or the engine.

I assumed this forum would be stating the same figures for granted.

my apologies if these aren’t compatible as common dialect with this forum.

19 hours ago, Aramith said:

During this period Japan im[posed speed and kilowatt speed restrictions on their car's

Umm..  speed limits.. yes, all JDM cars are capped at 180KM/H.

Power restrictions?  nope.. there was a 'gentleman's agreement' between different manufacturers back in in the 90s, which is why you see several Japanese performance cars specify 206KW, with plenty of rumours flying about how much the figures on some were understated (Just look at the official R32-34 GTR specs, conveniently all 206KW)

However, that was all gone by the time the V series skylines came along.  A VQ37VHR with a claimed power figure of 245KW, is going to be fairly spot on and you aren't going to get a whole lot more without spending some $$ on more than just a few ECU tweaks.

Edited by sonicii
19 hours ago, Aramith said:

bro's bro's bro's. The V series skylines are from like 2003, to like 2012. During this period Japan im[posed speed and kilowatt speed restrictions on their car's. Car's produced at this time can easily be tricked to get Way better performance by simple mods once the cars is shipped internationally. No one has these car's which this forum say's and all yall own skylines from the 90's. What's wrong with you's?!

Thats right its school holidays.....

Troll level achieved.

Aramith these guys are right and also cheeky with there comments because they come across new members asking and stating the same thing from time to time.

you can do a search on youtube and find some crew doing test and debunking these cheap power increase mods.

I've had the V35 the V36 and now the V37. They all cost alot of money to make more power, V37 a little less because it has a turbo and a tune does help alot, But done by a professional. I was quoted $1400 for a tune (extra 35hp at the wheels if i'm lucky)

your best power increase for your car will be a full exhaust and a better air intake

  • Like 1
6 hours ago, V35_Paul said:

Aramith these guys are right and also cheeky with there comments because they come across new members asking and stating the same thing from time to time.

you can do a search on youtube and find some crew doing test and debunking these cheap power increase mods.

I've had the V35 the V36 and now the V37. They all cost alot of money to make more power, V37 a little less because it has a turbo and a tune does help alot, But done by a professional. I was quoted $1400 for a tune (extra 35hp at the wheels if i'm lucky)

your best power increase for your car will be a full exhaust and a better air intake

The VR30DDTT isn't too bad for making power with. Shame it's an open deck block though.

On 21/09/2022 at 8:56 AM, V35_Paul said:

Aramith these guys are right and also cheeky with there comments because they come across new members asking and stating the same thing from time to time.

you can do a search on youtube and find some crew doing test and debunking these cheap power increase mods.

I've had the V35 the V36 and now the V37. They all cost alot of money to make more power, V37 a little less because it has a turbo and a tune does help alot, But done by a professional. I was quoted $1400 for a tune (extra 35hp at the wheels if i'm lucky)

your best power increase for your car will be a full exhaust and a better air intake

How do you find the lack of LSD after having it in the V36?

On 19/9/2022 at 6:03 PM, sonicii said:

Umm..  speed limits.. yes, all JDM cars are capped at 180KM/H.

Power restrictions?  nope.. there was a 'gentleman's agreement' between different manufacturers back in in the 90s, which is why you see several Japanese performance cars specify 206KW, with plenty of rumours flying about how much the figures on some were understated (Just look at the official R32-34 GTR specs, conveniently all 206KW)

However, that was all gone by the time the V series skylines came along.  A VQ37VHR with a claimed power figure of 245KW, is going to be fairly spot on and you aren't going to get a whole lot more without spending some $$ on more than just a few ECU tweaks.

Well how do I prove you wrong brother? Because I have 3 sources all quoting 15-20% KILOWATT increases from just ECU tweeks? And I’ve only seen scepticism about it in this forum.

what do you recommend? Not buy the eBay box claiming 15-20% power increase and up to 10% better economy for $250?

not buy an apexi aftermarket ECU for $750 that claims 15-20%power increase?

or not get stage 1 ECU tune from the dealers workshop giving another 40-50kilowat increase for $1500

 

bro, I only had the car 2 weeks and I had all these options given to me.

Edited by Aramith
  • Haha 2
7 minutes ago, Aramith said:

Well how do I prove you wrong brother?

Oh, that's easy.. go to a reputable tuner (preferably not the one that claims 50+kw from an ECU tune alone), run it on a dyno for a base figure, plug in your 'special' box.  do another dyno run and post the results!

Connect and tune your after-market ECU, run it again on the dyno.. post the results..

Or you could save yourself some time/money and listen to the people on this forum that have been down this road for themselves and learn from their experience/mistakes.

  • Like 1
13 minutes ago, Aramith said:

Well how do I prove you wrong brother? Because I have 3 sources all quoting 15-20% KILOWATT increases from just ECU tweeks? And I’ve only seen scepticism about it in this forum.

what do you recommend? Not buy the eBay box claiming 15-20% power increase and up to 10% better economy for $250?

not buy an apexi aftermarket ECU for $750 that claims 15-20%power increase?

or not get stage 1 ECU tune from the dealers workshop giving another 40-50kilowat increase for $1500

 

bro, I only had the car 2 weeks and I had all these options given to me.

Le sigh.

Point 1. You are right now communicating on pretty much the oldest and wisest Skyline forum in the world. Much knowledge was first disseminated here, before drifting out into the UK and US-centric forums. We know what is possible. We've been doing it for nearly 30 years.

Point 2. Of course the sources who want to sell you stuff will tell you that the stuff works miracles. And as you have been told already, it is trivial to adjust some dyno settings (or just hang the ambient air temperature sensor above the exhaust manifold!!) to get an artificially high power reading. And that's before you take into account the fact that your typical US dyno is calibrated to read horsepower from horses the size of large dogs.

Point 3. There is NO WAY you are getting 40+kW extra from a tune alone, on an already high strung NA engine. Not without something else added to the mix. That something else is not an exhaust or intake either, as these are only worth a handful of kW. I;m talking dyno fudgery, rocket fuel of some sort, or E85 plus a stupid amount of timing (stupid to the extent of being bad for the engine even if it isn;t knocking).

You need to stop this argument, because you are wrong.

  • Like 1
2 hours ago, Aramith said:

Well how do I prove you wrong brother? Because I have 3 sources all quoting 15-20% KILOWATT increases from just ECU tweeks? And I’ve only seen scepticism about it in this forum.

what do you recommend? Not buy the eBay box claiming 15-20% power increase and up to 10% better economy for $250?

not buy an apexi aftermarket ECU for $750 that claims 15-20%power increase?

or not get stage 1 ECU tune from the dealers workshop giving another 40-50kilowat increase for $1500

 

bro, I only had the car 2 weeks and I had all these options given to me.

What do you think each one of these things do to the car so that it makes the claimed power?

On 9/23/2022 at 2:04 PM, colin.ssc said:

How do you find the lack of LSD after having it in the V36?

I would like to have an LSD installed. But i don't think my V36 had one, if it did it wasn't working very well

  • 1 month later...

joined the v series group on facebook, there's 1250 members and most of ém have v series skylines THAT ARE LITERATE
It's australian. Thikning about swapping my v36 for a mitsubishi GTO.
Just istalled the GTR R-35 style headlights into my 370GT, They're kinda gimmicky but could come up good with powerful globes.
All yall who don't know what an ECu tweek is deserve to be suspended or banned and stop bullying new people with them. You Know Nothing.

 

 

Edited by Aramith
  • Haha 2
On 11/8/2022 at 7:44 PM, Aramith said:

joined the v series group on facebook, there's 1250 members and most of ém have v series skylines THAT ARE LITERATE
It's australian. Thikning about swapping my v36 for a mitsubishi GTO.
Just istalled the GTR R-35 style headlights into my 370GT, They're kinda gimmicky but could come up good with powerful globes.
All yall who don't know what an ECu tweek is deserve to be suspended or banned and stop bullying new people with them. You Know Nothing.

 

 

Post dyno charts bro

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
    • Yes, but no. You need to keep the mating surfaces bare (ie the flat faces where the caliper and upright pads touch the dogbone) and also the internal threads will remain bare (unless there are no internal threads - do they use nuts on all the bolts?). So you can slow down obvious external corrosion, but not all of it. Anodising would be required to provide decent protection to the alloy, but I'm not actually sure if you should anodise something that is all about the strength. Anodising does reduce strength significantly. Like, up to 50% on some alloys for high thickness coating.
×
×
  • Create New...