Jump to content
SAU Community

Recommended Posts

On 23/7/2022 at 2:56 AM, joshuaho96 said:

Are you sure you don't have the neutral switch wired to the reverse switch? Could also be a DOA switch.

The switch has two wires, one wire from the loom is live with ignition on and I assume the other wire goes to the lights. When I hold the switch and plug the wires in and press the switch button the lights come on as this creates the circuit, same scenario if I swap the wires over. When it’s attached to the gearbox and I go through the gears the lights come on with every gear and off with neutral, it’s like the selector is activating it in all gears.

The switch is supposed to be closed circuit only in neutral, open circuit in all other positions. If it is closed in all other positions, then it is somehow installed wrong, or broken. How you managed to achieve that while swapping the reverse switch is likely to remain a mystery. The other mystery, which we need to solve, is why it is working backwards mechanically.

  • 2 months later...
6 hours ago, ossie cossie said:

question witch switch is witch on these pics  the one has a yellow cable tie 

thumbnail_IMG_7934.jpg

thumbnail_IMG_7935.jpg

thumbnail_IMG_7936 (1).jpg

https://nissan.epc-data.com/skyline/bcnr33/3935-rb26dett/trans/321/32006M/

https://tfaspeed.com/products/nissan-skyline-r32-gtr-gts-4-reverse-switch-assembly-32005-21u1b-jdm-genuine

https://tfaspeed.com/products/nissan-skyline-r32-r33-gtr-r32-gts-4-neutral-saftey-switch-32006-31g01-jdm

Looks like rearmost should be the neutral position switch. The one closer to the bellhousing is the reverse switch.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
    • Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
×
×
  • Create New...