Jump to content
SAU Community

Rb25det S2 Tomei Camshaft and adjustable tomei cam gears

Dimon

By Dimon,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

joshuaho96 Veteran

joshuaho96

Posted
Posted
On 8/17/2022 at 4:39 AM, Dimon said:

G'DAY 

I have a question  

And I need  some info 

R33 Rb25det  S2    

Camshaft  Tomei  264 lift 8.5mm

Are they   drop in setup

Without modifications  of  head 

And how good are   they 

8.5mm is designed to be drop-in, probably won't be anything much to write home about but it will presumably do something.

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

https://www.kelfordcams.com/index.php/nz/camshafts/nissan/rb20-25de-det

Better off with a set of more modern cams from Kelford. Email them about your needs and they will recommend most suitable cam profile. I have a set of poncams, they dropped in and did valve springs too. Only because that was al that available in 2009...... 
More lift is what you want  

joshuaho96 Veteran

joshuaho96

Posted
Posted
On 8/17/2022 at 2:55 PM, robbo_rb180 said:

https://www.kelfordcams.com/index.php/nz/camshafts/nissan/rb20-25de-det

Better off with a set of more modern cams from Kelford. Email them about your needs and they will recommend most suitable cam profile. I have a set of poncams, they dropped in and did valve springs too. Only because that was al that available in 2009...... 
More lift is what you want  

I would also recommend whatever you do you get cams that retain the NVCS. Being able to swing the cam even if it's fixed 15 degrees of advance is well worth the effort.

  • Like 2
Dasmbo Collaborator

Dasmbo

Posted
Posted

Yes they are drop in like above i also have Kelford cam in my 33 you will also have to get your car tuned to get the most out of them i would speak to you tuner you might want larger injectors as well depends what other mods you have done to your engine lump idle doesnt mean it will go any better

  • Like 1
Dimon Rookie

Dimon

Posted
  • Author
Posted (edited)

So this  my setup

Walbro 460 fuel  pump straight  from the battery 

E85

370Z coilpacks 

Injectors NISMO 740CC

Fuel pressure  regulator tomei

90mm throtle body 

Front  mount intercooler

GTX3076R

38mm external gate 

Top mount  exhaust  manifold

3inch  exhaust  straight 

Greedy style  plenum

50mm blow off

Oil cooler 

Aluminium  radiator 

ARP head studs 

Tomei  head gasket  1.2mm or 1.3mm

Tomei camshaft  264  and 8.5  

Tomei camshaft gears 

Z32 AIR FLOW Miter 

APEXI POWER FC  

APEXI  BOOST CONTROLLER 

 

Edited by Dimon
robbo_rb180 Grand Master

robbo_rb180

Posted
Posted (edited)

the GTX 3076 will easily make over 320Kw on ethanol no need for cams as will only shift powerband up higher. My old gt3076 does 300kw on 16psi.
I am guessing you want more power?
Ditching the freddy plenum and 90mm throttle body will improve the torque & response everywhere.

Edited by robbo_rb180
  • Like 1
Dimon Rookie

Dimon

Posted
  • Author
Posted
On 18/08/2022 at 9:04 PM, robbo_rb180 said:

the GTX 3076 will easily make over 320Kw on ethanol no need for cams as will only shift powerband up higher. My old gt3076 does 300kw on 16psi.
I am guessing you want more power?
Ditching the freddy plenum and 90mm throttle body will improve the torque & response everywhere.

Yes I wanna  achieve  400kw 

But for 400kw  I need a new  ECU

And bottom  but it will  cost min 4K

So now I wanna really  safe 320kw-330kw

But in the  future   I'll  go to the 400kw and less work  it will take 

Dasmbo Collaborator

Dasmbo

Posted
Posted

If it were my setup replace 90mm throttle body to 80mm to help your apexi air flow setup on your manifold increase your injector size if your going to be running E85.

My setup on my car runs 660cc injectors BP98 Wolf 550 ecu no air flow meter Hyper Gear rtr 43ss2 Turbo 272 Kelford cams Greedy ported manifold with 80mm T/B Lewis stage 3 ported and flowed head and it makes 473hp with 15 pounds boost so im sure with a couple of tweeks you can get similar power i do think you should go the extra mile and get a better ecu as apexi is getting a bit long in the tooth. I hope you get your car up to your expectations

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      @GTSBoy Yeah i know. The RB20 has 180Nm torque and the gearbox "should" take up to 400Nm if you are not doing stuff like drag/drift or dumping clutch and of course then it is pure "luck" on how will it last. My problem is (i think i said this in different post) that my car was very badly maintain so i would not be suprised if the oil in the gearbox was not changed until i bought it. Yeah the gearbox seem little bit sad.   @Sxnjeet the +T seem very interesting but from where iam from it was nearly "impossible" to done right and not blow twice as money as just swap for the RB25.
    • Predator1
      How to preserved a signed plastic??

      By Predator1 · Posted

      Hi, I went to the MINES shop here and bought something.. Niikura-San just happened to be there so I managed to take some pics and got him to sign my dash surround thingy. Its still wrapped in plastic back home.. I was thinking how to preserve the signature??? Im sure someones thought of this and done this in the past.
    • mcfwordsworth
      Purchase new air conditioning condenser, and receiver / drier

      By mcfwordsworth · Posted

      Perfect - thanks Joshuaho96!  Will see what I can source.
    • MBS206
      Spray painting interior plastics

      By MBS206 · Posted

      If the plastic wore, the paint will wear quicker. Heck, most car manufacturers cant keep the coatings they put on their buttons/trims alive these days for more than 5 years... A cheap paint won't do it!   However, you can get away with high quality vynil wrap, primarily in areas that won't cop much abuse. Skip colour matching, and just try and wrap a specific area with an edge in a new colour.   PS vynil wrapping is a prick of a job, and I suck at it, even for a small dead flat surface...
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      I think this is more a question you should ask the tuner. My assumption is you have nothing plugged into the original pin for ring gear crankshaft, which is where your map sensor should get wired to, but now you've asked the tuner to disable it. I'm assuming (because I haven't memorised your setup) you are using RB25 ECU on the RB20 loom, to plug into an RB25. You will want to check what else is connected potentially backwards between the engine, loom, and ECU. You might be all fine and safe. The best solution you could have done is wire in a map sensor, and leave the ECU able to read a map sensor.
×
×
  • Create New...