Jump to content
SAU Community

Rb25det S2 Tomei Camshaft and adjustable tomei cam gears

Dimon

By Dimon,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

joshuaho96 Veteran

joshuaho96

Posted
Posted
On 8/17/2022 at 4:39 AM, Dimon said:

G'DAY 

I have a question  

And I need  some info 

R33 Rb25det  S2    

Camshaft  Tomei  264 lift 8.5mm

Are they   drop in setup

Without modifications  of  head 

And how good are   they 

8.5mm is designed to be drop-in, probably won't be anything much to write home about but it will presumably do something.

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

https://www.kelfordcams.com/index.php/nz/camshafts/nissan/rb20-25de-det

Better off with a set of more modern cams from Kelford. Email them about your needs and they will recommend most suitable cam profile. I have a set of poncams, they dropped in and did valve springs too. Only because that was al that available in 2009...... 
More lift is what you want  

joshuaho96 Veteran

joshuaho96

Posted
Posted
On 8/17/2022 at 2:55 PM, robbo_rb180 said:

https://www.kelfordcams.com/index.php/nz/camshafts/nissan/rb20-25de-det

Better off with a set of more modern cams from Kelford. Email them about your needs and they will recommend most suitable cam profile. I have a set of poncams, they dropped in and did valve springs too. Only because that was al that available in 2009...... 
More lift is what you want  

I would also recommend whatever you do you get cams that retain the NVCS. Being able to swing the cam even if it's fixed 15 degrees of advance is well worth the effort.

  • Like 2
Dasmbo Collaborator

Dasmbo

Posted
Posted

Yes they are drop in like above i also have Kelford cam in my 33 you will also have to get your car tuned to get the most out of them i would speak to you tuner you might want larger injectors as well depends what other mods you have done to your engine lump idle doesnt mean it will go any better

  • Like 1
Dimon Rookie

Dimon

Posted
  • Author
Posted (edited)

So this  my setup

Walbro 460 fuel  pump straight  from the battery 

E85

370Z coilpacks 

Injectors NISMO 740CC

Fuel pressure  regulator tomei

90mm throtle body 

Front  mount intercooler

GTX3076R

38mm external gate 

Top mount  exhaust  manifold

3inch  exhaust  straight 

Greedy style  plenum

50mm blow off

Oil cooler 

Aluminium  radiator 

ARP head studs 

Tomei  head gasket  1.2mm or 1.3mm

Tomei camshaft  264  and 8.5  

Tomei camshaft gears 

Z32 AIR FLOW Miter 

APEXI POWER FC  

APEXI  BOOST CONTROLLER 

 

Edited by Dimon
robbo_rb180 Grand Master

robbo_rb180

Posted
Posted (edited)

the GTX 3076 will easily make over 320Kw on ethanol no need for cams as will only shift powerband up higher. My old gt3076 does 300kw on 16psi.
I am guessing you want more power?
Ditching the freddy plenum and 90mm throttle body will improve the torque & response everywhere.

Edited by robbo_rb180
  • Like 1
Dimon Rookie

Dimon

Posted
  • Author
Posted
On 18/08/2022 at 9:04 PM, robbo_rb180 said:

the GTX 3076 will easily make over 320Kw on ethanol no need for cams as will only shift powerband up higher. My old gt3076 does 300kw on 16psi.
I am guessing you want more power?
Ditching the freddy plenum and 90mm throttle body will improve the torque & response everywhere.

Yes I wanna  achieve  400kw 

But for 400kw  I need a new  ECU

And bottom  but it will  cost min 4K

So now I wanna really  safe 320kw-330kw

But in the  future   I'll  go to the 400kw and less work  it will take 

Dasmbo Collaborator

Dasmbo

Posted
Posted

If it were my setup replace 90mm throttle body to 80mm to help your apexi air flow setup on your manifold increase your injector size if your going to be running E85.

My setup on my car runs 660cc injectors BP98 Wolf 550 ecu no air flow meter Hyper Gear rtr 43ss2 Turbo 272 Kelford cams Greedy ported manifold with 80mm T/B Lewis stage 3 ported and flowed head and it makes 473hp with 15 pounds boost so im sure with a couple of tweeks you can get similar power i do think you should go the extra mile and get a better ecu as apexi is getting a bit long in the tooth. I hope you get your car up to your expectations

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      R32 GTS-t RB30 sedan

      By Lithium · Posted

      To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • Lithium
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Lithium · Posted

      Outstanding!
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...