Jump to content
SAU Community

Transgo Shift kit RE5R05A (HD-2 - for a 370GT coupe *** Yes, I have read all the old posts***


Recommended Posts

Hi guys,

I have had a v35 for nearly 5 years and recently sold for a v36 coupe upgrade.

I have purchased the shift kit and am waiting for it's arrival.

My query is around finding a place/person in Melbourne to install for me.

All the old forums on this are 10yrs or so old so I don't want to msg those individuals who may not even like these cars anymore haha.

I have obviously called around some shops out west where I live but haven't gotten very far/they all want to see it and I'm struggling to even get a quote...

Thanks all,

Feel free to email me even if you know a place/have done it/can do it etc etc on [email protected]

Thank you for the replies gents, which shop is that Vee37? I have tried Hoppers Transmissions and Diffs and Techtrans to no avail. I'm hoping to find a shop that has maybe done it before.

Thanks for the reminder Paul, I'm tossing up between Matic J or S, but I am pretty sure from reading Matic S fluid is newer.

I have read a lot of US forums/g37 forums BUT I have seen old posts on here from like 2012 where guys in Melb were offering prices, hoping they'll reach out to me if they still do them.

On 8/28/2022 at 3:55 PM, Sammo V35 said:

Thank you for the replies gents, which shop is that Vee37? I have tried Hoppers Transmissions and Diffs and Techtrans to no avail. I'm hoping to find a shop that has maybe done it before.

Thanks for the reminder Paul, I'm tossing up between Matic J or S, but I am pretty sure from reading Matic S fluid is newer.

I have read a lot of US forums/g37 forums BUT I have seen old posts on here from like 2012 where guys in Melb were offering prices, hoping they'll reach out to me if they still do them.

I was ltalking about the previous post, referring to estimates in the US.

On 8/25/2022 at 5:48 PM, V35_Paul said:

on the US forums they say it takes a shop 4 hours.

ask their hourly rate.

Plus fluids too 👍 

 

On 8/28/2022 at 3:55 PM, Sammo V35 said:

I'm tossing up between Matic J or S, but I am pretty sure from reading Matic S fluid is newer.

Matic S is a lower viscosity fluid, if the manual specifies J, make sure it will happily run on the lower viscosity S before you use it.

  • Like 1

Sonicii - I have read on many forums that Matic S replaced J? Is this not true, I found a shop that can do it but they say in their quote they won't use nissan special oil (i,e matic S/J), do you know much about these trans and if that will be ok?

 

On 9/1/2022 at 2:55 PM, Sammo V35 said:

Sonicii - I have read on many forums that Matic S replaced J? Is this not true

Not exactly.  Matic S is a newer fluid.  Many Transmissions that specified J before S came out, can happily run on S, but they are not the same fluids (same with NS2/NS3 with Nissan FWD CVTs).  For example, my Infiniti specifies Matic S for the transmission, but Matic J for the transfer case as it requires a higher viscosity fluid.

Sorry, I don't know with any certainty if the RE5 can happily run on Matic S, plenty of forums and web pages say it can..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. I need a new clutch for my gearbox. It is a factory smallbox behind RB20DE NEO. What options do i have? If iam not mistaken the gearbox should be the same as in R32 GTST and Nissan S14/S15? I found some Xtreme Clutch Stage 1 for S14/S14 (i dont know if you know the brand) (UK) OR...is the clutch same as in the bigbox from RB25DET?   Thank you!  
    • Listening to an artist called "the flashbulb". Not bad. Makes some fairly well researched youtube vids in various things.
    • Is actually easier than you might think. Assuming you have a spot, youfab up the branch, then just hang a longer than you can fit length of pipe down from there, and chop bits off piece by piece and decde which length was the quietest/nicest, then just put that length up in the place where it will fit. Clever folk can actually make like a trombone slide type arrangement so you can just play it like an instrument to find the best length.
    • Buy her some ear plugs.   Or, wear earplugs so you also can't hear Jackie whining...
    • Necroing this thread in 2025 to say thanks! The Manual for the m60 still has the wrong instructions and says to only press button 2 with ignition on. You are a champ, thank you.
×
×
  • Create New...