Jump to content
SAU Community

Help sorting slight miss

C.callander
 Share

Recommended Posts

C.callander Apprentice

C.callander

Posted
Posted

Hey guys any ideas on my culprit on my miss fire been chasing it for months, my r33 s2  Rb25de has a slight miss / rough idle which can sometimes be heard when i give it a rev the thing that makes it harder is it comes n goes. Things iv checked n fixed are checked intake for air leaks there are none, replaced my coil loom with a brand new one, brand new spark plugs, reset the timing with timing light. Im going to be getting the injectors serviced soon. I done a compression test about 3 months ago and got 160 av so should be sweet there. Any ideas or tips highly appreciated cheers 

Link to comment
Share on other sites
robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

Get a consult adapter and check for error codes

Borrow a set of good condition (brand new stock/splitfire or r35 kit not yellow/red/linglong) coils and see if that works 

Test fuel pressure by putting a gauge between the filter and reg

Check tps voltage scales evenly and doesn't jump around 

 

OR

take it to a mechanic who deals with 90s Japanese cars 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      I am currently going this route. I am curious how much horse power you put behind the cut bell housing? Collins was telling me I am going to crack it and bluh bluh bluh. Because I didn’t buy the custom fly wheel from him. I am looking for somewhere around like 500 hp
    • Beanie
      Hello from the UK

      By Beanie · Posted

      Forgot to mention that these are the before pics when I first got it!
    • Beanie
      Hello from the UK

      By Beanie · Posted

      Thanks @PranK for the updated member status, much appreciated! 👍🏼 Now, about those pics… Unfortunately I could only find ones that I took in the dark. I was soon to discover that underneath it wasn’t in the best shape, but it was mine and that’s all I cared about at the time 😆
    • r32-25t
      PRP RB26 cast block + head prototype running

      By r32-25t · Posted

      Buy one
    • GTSBoy
      A little PU bush story

      By GTSBoy · Posted

      Oh, and only having done this task yesterday, I've now driven the car ~60km since, and while it is hard to avoid placebo effect and confirmation bias, I reckon that some annoyances I had with the way the car has been behaving have improved. Which....kinda makes sense, I guess. If the bushes were really stiff and resisting rotation, they would have been contributing to the effective wheel rate. And if it was more so on one side (which it was, because one side was worse than the other) then.... you might imagine that the additional rate would be asymmetric, and potentially even different between compression and rebound. And so... the car has been twitchy at higher speeds - like freeway on ramps. It really shouldn't be. The wheel alignment is good and there are no (other) known problems elsewhere in the suspension. But at 90-100 on a long sweeping ramp, tiny steering wheel motions would make it feel like it wanted to rear steer. Quite nervous. At lower speeds it would heave about in a manner that it didn't use to. Didn't want to put power down, etc etc. Now...seems to behave better. Am going to have to concentrate on the various corners where it has exhibited weirdness, on the rare occasions when I can get a decent run at them without Methanial getting in the way in his D-Max/Ranger/LDV Van/etc.
×
×
  • Create New...