Jump to content
SAU Community

Recommended Posts

On 24/01/2023 at 3:46 PM, Duncan said:

well, here's your chance.

If you think re-opening Wakefield is a vote changing reason, here you go:

https://www.speedcafe.com/2023/01/24/nsw-opposition-leader-pledges-1-million-to-save-wakefield-park/?utm_medium=email&utm_campaign=SC Newsletter 23012023&utm_content=SC Newsletter 23012023+CID_3c15d3629f15afd835307ac42be0a895&utm_source=Campaign Monitor

Personally, I don't see that it outweighs their choice to keep money laundering alive through pokies, but that's the great thing about democracy, everyone gets one opinion and 1 vote :)

The $1 million pledge would be used for noise mitigation work, and the Department of Planning, Goulburn Mulwaree Council, and Office of Sport would be directed to develop a plan for reopening the circuit. Minns cited the race track's use for driver training for the state's police academy, which is based in Goul

Edited by Duncan
Thanks for sneaky link addition in the quote Bot

@Duncan or @PranK the post above from Emporer Gill has had a sneaky edit of Duncan's post to include an extra link in it that wasn't there in Duncan's original post. I'm guessing scam, spam, or malicious content :)

  • Thanks 1
5 hours ago, MBS206 said:

@Duncan or @PranK the post above from Emporer Gill has had a sneaky edit of Duncan's post to include an extra link in it that wasn't there in Duncan's original post. I'm guessing scam, spam, or malicious content :)

hahah thanks mate, I appreciate our users are sharper than bots (so far!)

  • Like 2
  • 2 months later...

Ahh I didn't realise. I'm sure they would want a PDF of the story posted to promote regional businesses

 

Goulburn's One Raceway zooms back into operation with 'world first' _ Goulburn Post _ Goulburn, NSW.pdf

  • Thanks 4
35 minutes ago, r32-25t said:

Isn’t that the one in katoomba that pretty much gets used as a bicycle track now?

SAU NSW had it as one of the "historic" scenic stops on a cruise that I went on years ago

To say it was overgrown with vegetation at the time would have been an understatement

Did walk the track and reminisce about times gone by

Now

Before.....looks very unforgiving 

 

  • Like 2

 Oh yes the good old days !

I remember that track in the day an thinking this is unforgiving with no room for any errors as you'd be like the ball in a pinball machine.

To dive it at speed beforehand, you'd have to go down to your local fruit shop and buy a couple of coconuts and shove them down your pants ! !  

Edited by PLYNX
  • Like 1
  • 2 weeks later...

Following the video Wakefield Park (One Raceway) posted on youtube of the track going in both directions, I'm intrigued to see what they do for running the track in the counter clock wise direction.

Based purely from the track being made and put into a racing game, I can forsee some issues going backwards.

They've also changed quite a few of the corners too. It's pretty much just vaguely shaped like Wakefield Park used to be.

The track looks great in both directions and seems to be a few small changes in the old area's. I have never been there but seen old footage and google earth pic's.

18 minutes ago, MBS206 said:

Following the video Wakefield Park (One Raceway) posted on youtube of the track going in both directions, I'm intrigued to see what they do for running the track in the counter clock wise direction.

Based purely from the track being made and put into a racing game, I can forsee some issues going backwards.

They've also changed quite a few of the corners too. It's pretty much just vaguely shaped like Wakefield Park used to be.

They shouldn't have to do anything as they would have created longer/deeper run off area's and placed tyre wall to allow for both directions. May have to turn the safety light boards around but you would think they would have bought more to allow it.
Having done a few track layouts with some considerable safety concerns and mitigating this would be fine, the small kinks and chicanes as part of the redesign allow for cars to slow down  before the bigger corners.

My main issue I can see a problem with, is in reverse direction, turn one.

 

From the video simulation (the pics they've uploaded previously don't show the changes fully to Final turn normal direction/turn one in reverse).

Watch the simulation they've made, and in reverse, as you get to the first turn, you need to kink right, but until your right there, the old track for straight to the old turn is fully visible, and looks to be where to go.

They've then dug DOWN, and made that turn heavily cambered as it goes back the "180 degrees" to the left.

From old to new, if you went straight ahead, is a hefty drop. Or more so, a wild airborne ride...

As I said, I rather waited to see what it REALLY ends up like, and how they actually do things at the track. But I can see potential on track days for someone to do a straight ahead, get airborne, and be T Boning a car that was previously in front of them.

 

Basically, I'd think they'll have to put some heft tyre barriers there, but that's going to make for one hell of a brutal stop, especially for a bike rider...

  • 3 weeks later...

Interesting how sports always have their hands out for grants. $1M was promised to Wakie by state government (and not yet paid last I saw).

Now $9.5M being given to short people who whip horses in Goulburn....I'm really not sure why my taxes should fund stables.

Goulburn racecourse to benefit from $20 million NSW Government investment _ Goulburn Post _ Goulburn, NSW.pdf

  • Confused 1
  • Sad 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • ...oops. forgot the TCU end...
×
×
  • Create New...