Jump to content
SAU Community

Recommended Posts

Hey sorry, probably shouldve put more info 🤣 ill double check if he has a dyno sheet but not confident he does.

Its an r33 gtst, 25det. 86,000kms. It runs @ 9psi atm, so would 388rhp be realistic for that type of boost? (New to turbo cars in general)

Im currently looking at MV's valve body and a 19row oil cooler as hes blown 2 gearboxes already (family member so not worried about it too much).

Getting it super cheap so keen to start working on it. Possibly turning down the boost just to save it for longer until manual conversion.

And yes he plays the war, farming games 🤣🤣 

38 minutes ago, Zeeable said:

Really? Is that with oil cooler etc? Or just the plain old box

Let's be clear. It's a road car. You can't stay on the power for more than about 10s at a time anyway, and even if you flog it through the hills you're only on the power < half the time. You don't need to worry about cooling the box too much, and it is mechanically strong enough to handle that much torque.

If you cane it silly, then yes, it will suffer. But if you drive it around normally, and launch it from the lights some of the time, you're not doing anything outrageous to it. If it breaks, it will be because it's 30 years old.

5 hours ago, BK said:

Nismo 740cc injectors seem to indicate the side feed ones, which would point towards an RB25.

Next to the 60m food ?

Looks like the food was 36m?

1 hour ago, GTSBoy said:

Let's be clear. It's a road car. You can't stay on the power for more than about 10s at a time anyway, and even if you flog it through the hills you're only on the power < half the time. You don't need to worry about cooling the box too much, and it is mechanically strong enough to handle that much torque.

If you cane it silly, then yes, it will suffer. But if you drive it around normally, and launch it from the lights some of the time, you're not doing anything outrageous to it. If it breaks, it will be because it's 30 years old.

Yeah stock 30 year old RE4 with a 3788 even at 9psi doesn't sound ideal

  • 3 weeks later...
On 11/17/2022 at 2:27 PM, Duncan said:

Does the current owner have a dyno graph? It is a bit of an old school setup but probably around 400 rwkw.

Where is the 100m wood installed?

🤣

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm at the point of seriously starting a project to build and Arduino/mc (of some sort) based multigauge to go in the console where triple gauges normally sit. I have found a screen of the right dimensions. I would need to 3D print a bezel/housing to make it mount up pretty. That's doable. I would need to come up with interfacing circuitry for the EGT thermocouple. I'm sure there will be examples of that into Arduino out there somewhere. Ditto with characterising the output of the existing boost gauge's MAP sensor and the oil T gauge's thermistor. And then, because it is a screen, it can be controllable, so it can show more than the 3 gauges I currently have. So I can come up with a list of other things I want to be able to show on it that can be reasonably easily handled via an Arduino's inputs. I do not need this project. But the stepper gauges I'm using are giving me grief. It's time to come kicking and screaming into the 21st century.
    • Would you really prefer pillar gauges over something like this? https://www.haltech.com/product/ht-067010-haltech-ic-7-digital-dash-kit/ Or if you can spend more, this? https://www.haltech.com/product/ht-068000-haltech-uc-10/ I could write a thesis about how much better a modern dash is compared to a series of gauges. 
    • People think it's a waste of space, ugly, etc, generally associate "emissions control equipment" with "bad". These OBD1 vacuum-only systems I'm not a huge fan because I think they don't go far enough. They're wasting some of the fuel captured because they start purging as soon as the engine pulls vacuum. Later OBD1/OBD2 they put an electric purge valve on them to vent only when closed loop is active so the ECU will trim some fuel out. Even later OBD2 with zero evaporative loss the tank is 100% sealed from atmosphere until you run the engine or press the refuel door release. The tank has to take much higher vacuum/pressure spec but you never deal with saturating the charcoal canister and losing some fuel that way. The fuel also lasts as long as it would in a 100% airtight container which is nice when you're dealing with modern E10 pump gas.
    • If your luck is anything like mine, what happens is in the process of pulling hoses to get access to the one leak you create many more leaks because every o-ring was on the verge of failing and the strain of pulling it apart caused it to fail. Sometimes life is simple, sometimes you pay twice trying to save once. For the R33 you can still get most AC components from Nissan, I use nissan epc data or amayama to look up the part numbers and then search for the cheapest/most practical way of sourcing from there.
    • The dirty secret is there is nothing recyclable about the plastic bag or old plastic bottles either. Our local trash collection explicitly calls it out as hazmat in both cases. Oil-soaked rags + paper towels too. Oil-soaked cardboard is also not recyclable. The most common case of oil-soaked paper like that is pizza boxes, which are explicitly compost-only from the oil. To my knowledge hazmat oil contaminated plastic the only solution is either landfill or "thermal recycling". Most plastics in my experience there is slow permeation of the oil it's holding into the container so it's very challenging to get it 100% clean.
×
×
  • Create New...