Jump to content
SAU Community

R32 auto gear shifters??

DarcyMcElwaine
 Share

Recommended Posts

Duncan Grand Master

Duncan

Posted
Posted

Hi Darcy, welcome to the forums.

Can you clarify what you are missing? maybe a pic? do you have the shifter rod in the console without a knob on the top?

Your profile doesn't say where you are so it is difficult to recommend where to find one if that is what you need.

DarcyMcElwaine Apprentice

DarcyMcElwaine

Posted
  • Author
Posted
On 12/23/2022 at 5:56 AM, Duncan said:

Hi Darcy, welcome to the forums.

Can you clarify what you are missing? maybe a pic? do you have the shifter rod in the console without a knob on the top?

Your profile doesn't say where you are so it is difficult to recommend where to find one if that is what you need.

So i live around the Noosa area and there's pretty much just a hole looking into my transmission so i need the whole set up i can post a photo later 

GTSBoy Grand Master

GTSBoy

Posted
Posted
On 12/25/2022 at 10:55 PM, DarcyMcElwaine said:

So i live around the Noosa area and there's pretty much just a hole looking into my transmission so i need the whole set up i can post a photo later 

The auto transmission shifter does not go into a hole in the top of the tranny. The shifter connects to a rod that runs down the side of the tranny. The manual gearboxes have a hole in the top of the box for the shifter to go into.

DarcyMcElwaine Apprentice

DarcyMcElwaine

Posted
  • Author
Posted
On 12/28/2022 at 9:00 AM, GTSBoy said:

The auto transmission shifter does not go into a hole in the top of the tranny. The shifter connects to a rod that runs down the side of the tranny. The manual gearboxes have a hole in the top of the box for the shifter to go into.

Sorry i meant like a hole in the floor not the tran itself

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...