Jump to content
SAU Community

Recommended Posts

Hi I need your help.

I just changed the fuel pump in my R32 rb20det, and took it for a drive. It was responding very well and then all of a sudden a few minutes into the drive it started to rumble. It pretty much sounds like a boxer engine now and the car shakes slightly.

I need some ideas or areas of focus because I'm currently freaking out

 

 

Faulty injector, coil pack, cas or head gasket. List is endless.

What else have you done while swapping pump? How were you driving? What was temps?

List mods and answer above. They are a 30+ year old car and lots go wrong with them.

 

First things first. Install fuel pressure gauge between engine bay fuel filter and fuel rail. Check for correct fuel pressure at idle, at low load and, if these look fine, at higher load.

Maybe first things before the first thing. Take apart what you've just done and see whether you have failed to make a connection properly and something is leaking in the wrong spot. Broken wire at crimp terminal, etc etc.

  • Like 1
1 hour ago, GTSBoy said:

First things first. Install fuel pressure gauge between engine bay fuel filter and fuel rail. Check for correct fuel pressure at idle, at low load and, if these look fine, at higher load.

Maybe first things before the first thing. Take apart what you've just done and see whether you have failed to make a connection properly and something is leaking in the wrong spot. Broken wire at crimp terminal, etc etc.

Agreed....and change your fuel filter too incase something was dislodged while you were changing the pump

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...